Aluminum Pieces

CAS #

Al

Request a Quote

Product Code Product Request Quote
AL-M-02-PCS (2N) 99% Aluminum Pieces Request
AL-M-03-PCS (3N) 99.9% Aluminum Pieces Request
AL-M-04-PCS (4N) 99.99% Aluminum Pieces Request
AL-M-05-PCS (5N) 99.999% Aluminum Pieces Request
AL-M-06-PCS (6N) 99.9999% Aluminum Pieces Request

About

American Elements specializes in producing high purity Shot and irregular shaped Aluminum Pieces with the highest possible density and smallest possible average grain sizes for use in Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard Pieces sizes average in the range of 3 mm, 4 -5 mm, 100 - 150 mm, 1/8" and 1/4". We can also provide Pieces and Shot outside this range. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes and through other processes nanoparticles. See research below. We also produce Aluminum as rod, ingot, powder, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.

Synonyms

N/A

Chemical Identifiers

Formula Al
CAS 7429-90-5
Pubchem CID 5359268
MDL MFCD00134029
EC No. 231-072-3
IUPAC Name aluminum
Beilstein Registry No. N/A
SMILES [Al]
InchI Identifier InChI=1S/Al
InchI Key XAGFODPZIPBFFR-UHFFFAOYSA-N

Properties

Molecular Weight 26.98
Appearance Silvery
Melting Point 660.37 °C
Boiling Point 2467 °C
Density 2700 kg/m3
Tensile Strength 6800 psi Coldroled 16,000 psi.
Thermal Conductivity 2.37 W/cm/ K @ 298.2 K
Electronegativity 1.5 Paulings
Specific Heat 0.215 Cal/g/ K @ 25 °C
Heat of Vaporization 67.9 K-Cal/gm at om at 765 °C
Heat of Fusion 2.55 Cal/gm mole

Health & Safety Info  |  MSDS / SDS

Signal Word Warning
Hazard Statements H400
Hazard Codes N
Risk Codes 50
Safety Statements 61
RTECS Number BD0330000
Transport Information UN 3077 9 / PGIII
WGK Germany 3
Globally Harmonized System of Classification and Labelling (GHS) N/A
MSDS / SDS

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Material Safety Data Sheet (MSDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes.

Related Products

AlSee more Aluminum products. Aluminum (or Aluminum) (atomic symbol: Al, atomic number: 13) is a Block P, Group 13, Period 3 element with an atomic weight of 26.9815386. It is the third most abundant element in the earth's crust and the most abundant metallic element. Aluminum Bohr Model Aluminum's name is derived from alumina, the mineral from which Sir Humphrey Davy attempted to refine it from in 1812. It wasn't until 1825 that Aluminum was first isolated by Hans Christian Oersted. Aluminum is a silvery gray metal that possesses many desirable characteristics. It is light, nonmagnetic and non-sparking. It stands second among metals in the scale of malleability, and sixth in ductility. It is extensively used in many industrial applications where a strong, light, easily constructed material is needed. Elemental AluminumAlthough it has only 60% of the electrical conductivity of copper, it is used in electrical transmission lines because of its light weight. Pure aluminum is soft and lacks strength, but alloyed with small amounts of copper, magnesium, silicon, manganese, or other elements it imparts a variety of useful properties. Aluminum was first predicted by Antoine Lavoisierin 1787 and first isolated by Friedrich Wöhler in 1827.

Research

Recent Research & Development for Aluminum

  • Condensate Microdrop Self-Propelling Aluminum Surfaces Based on Controllable Fabrication of Alumina Rod -Capped Nanopore Structures. Zhao Y, Luo Y, Li J, Yin F, Zhu J, Gao X. ACS Appl Mater Interfaces. 2015 May 18.
  • Helical growth of aluminum nitride: new insights into its growth habit from nanostructures to single crystals. Zhang XH, Shao RW, Jin L, Wang JY, Zheng K, Zhao CL, Han JC, Chen B, Sekiguchi T, Zhang Z, Zou J, Song B. Sci Rep. 2015 May 15
  • Hardness and wear resistance of carbon nanotube reinforced aluminum-copper matrix composites. Nam DH, Kim JH, Cha SI, Jung SI, Lee JK, Park HM, Park HD, Hong H. J Nanosci Nanotechnol. 2014 Dec
  • Co-Ni alloy nanowires prepared by anodic aluminum oxide template via electrochemical deposition. Kwag YG, Ha JK, Kim HS, Cho HJ, Cho KK. J Nanosci Nanotechnol. 2014 Dec
  • Suspended 2-D photonic crystal aluminum nitride membrane reflector. Ho CP, Pitchappa P, Soon BW, Lee C. Opt Express. 2015 Apr 20
  • A molecular beacon biosensor based on the nanostructured aluminum oxide surface. Che X, He Y, Yin H, Que L. Biosens Bioelectron. 2015 May 9
  • Efficacy and safety of aluminum chloride in controlling external hemorrhage: an animal model study. Nouri S, Sharif MR, Panahi Y, Ghanei M, Jamali B. Iran Red Crescent Med J. 2015 Mar 20
  • Quaternary polymethacrylate-magnesium aluminum silicate films: Water uptake kinetics and film permeability. Rongthong T, Sungthongjeen S, Siepmann F, Siepmann J, Pongjanyakul T. Int J Pharm. 2015 May 21.
  • Coagulation behavior and floc properties of compound bioflocculant-polyaluminum chloride dual-coagulants and polymeric aluminum in low temperature surface water treatment. Huang X, Sun S, Gao B, Yue Q, Wang Y, Li Q. J Environ Sci (China). 2015 Apr 1: J Environ Sci (China)
  • Tannoid principles of Emblica officinalis renovate cognitive deficits and attenuate amyloid pathologies against aluminum chloride induced rat model of Alzheimer's disease. Justin Thenmozhi A, Dhivyabharathi M, William Raja TR, Manivasagam T, Mohamed Essa M. Nutr Neurosci. 2015 Apr 4. : Nutr Neurosci

Free Test Sample Program

We recognize many of our customers are purchasing small quantities directly online as trial samples in anticipation of placing a larger future order or multiple orders as a raw material for production. Since our primary business is the production of industrial quantities and/or highly consistent batches which can be used for commercial production and purchased repeatedly in smaller quantity, American Elements offers trial samples at no charge on the following basis. Within 6 months of purchasing materials directly online from us, you have the option to refer back to that order and advise that it is the intention of your company, institution or lab to either purchase a larger quantity, purchase the material in regular intervals or purchase more on some other basis.

We will then evaluate your future needs and assuming the quantity or number of future purchases qualify, we will fully credit your purchase price with the next order. Because of the many variables in the quantity and number of orders you may place, it is impossible to evaluate whether your future order(s) will qualify for this program prior to your placing your next order. Please know American Elements strongly desires to make this free sample program available to you and will make every effort to do so once your next order is placed.