CAS #:

Linear Formula:

Ho

MDL Number:

MFCD00011049

EC No.:

231-169-0

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Holmium Powder
HO-M-02-P
Pricing > SDS > Data Sheet >
(3N) 99.9% Holmium Powder
HO-M-03-P
Pricing > SDS > Data Sheet >
(4N) 99.99% Holmium Powder
HO-M-04-P
Pricing > SDS > Data Sheet >
(5N) 99.999% Holmium Powder
HO-M-05-P
Pricing > SDS > Data Sheet >

Holmium Powder Properties (Theoretical)

Molecular Weight 164.93
Appearance Silvery
Melting Point 1474 °C
Boiling Point 2695 °C
Density 8.795 gm/cc
Solubility in H2O N/A
Electrical Resistivity 87.0 microhm-cm @ 25 °C
Electronegativity 1.2 Paulings
Heat of Fusion 4.10 Cal/gm mole
Heat of Vaporization 67 K-Cal/gm atom at 2695 °C
Poisson's Ratio 0.231
Specific Heat 0.0393 Cal/g/ K @ 25 °C
Tensile Strength N/A
Thermal Conductivity 0.162 W/cm/ K @ 298.2 K
Thermal Expansion (r.t.) (poly) 11.2 µm/(m·K)
Vickers Hardness 481 MPa
Young's Modulus 64.8 GPa

Holmium Powder Health & Safety Information

Signal Word Danger
Hazard Statements H250-H252-H260
Hazard Codes F
Precautionary Statements P210-P222-P231+P232-P370+P378-P422-P501
Risk Codes N/A
Safety Statements N/A
Transport Information UN1383 4.2 PG I
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 03/18/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Holmium Powder

Product Number: All applicable American Elements product codes, e.g. HO-M-02-P , HO-M-03-P , HO-M-04-P , HO-M-05-P

CAS #: 7440-60-0

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture in accordance with 29 CFR 1910 (OSHA HCS)
GHS02 Flame
Pyr. Sol. 1 H250 Catches fire spontaneously if exposed to air.
Self-heat. 2 H252 Self-heating in large quantities; may catch fire.
Water-react. 1 H260 In contact with water releases flammable gases which may ignite spontaneously.
Hazards not otherwise classified
No data available.
GHS label elements
The product is classified and labeled in accordance with 29 CFR 1910 (OSHA HCS)
Hazard pictograms

Flame - GHS02

GHS02
Signal word
Danger
Hazard statements
H250 Catches fire spontaneously if exposed to air.
H252 Self-heating in large quantities; may catch fire.
H260 In contact with water releases flammable gases which may ignite spontaneously.
Precautionary statements
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P222 Do not allow contact with air.
P231+P232 Handle under inert gas. Protect from moisture.
P370+P378 In case of fire: Use for extinction: CO2, sand, extinguishing powder.
P422 Store contents under inert gas.
P501 Dispose of contents/container in accordance with local/regional/
national/international regulations.
WHMIS classification
B6 - Reactive flammable material
Classification system
HMIS ratings (scale 0-4)
(Hazardous Materials Identification System)
Health (acute effects) = 1
Flammability = 4
Physical Hazard = 2
Other hazards
Results of PBT and vPvB assessment:
PBT:
N/A.
vPvB:
N/A.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Substances
CAS No. / Substance Name:
7440-60-0 Holmium powder
Identification number(s):
EC number:
231-169-0


SECTION 4. FIRST AID MEASURES

Description of first aid measures
If inhaled:
Supply fresh air. If not breathing, provide artificial respiration. Keep patient warm.
Seek immediate medical advice.
In case of skin contact:
Immediately wash with soap and water; rinse thoroughly.
Seek immediate medical advice.
In case of eye contact:
Rinse opened eye for several minutes under running water. Consult a physician.
If swallowed:
Seek medical treatment.
Information for doctor
Most important symptoms and effects, both acute and delayed
No information available.
Indication of any immediate medical attention and special treatment needed
No information available.


SECTION 5. FIREFIGHTING MEASURES

Extinguishing media
Suitable extinguishing media
Special powder for metal fires. Do not use water.
For safety reasons unsuitable extinguishing media
Water
Special hazards arising from the substance or mixture
Spontaneously flammable in air.
If this product is involved in a fire, the following can be released:
Metal oxide fume
Advice for firefighters
Protective equipment:
Wear self-contained respirator.
Wear fully protective impervious suit.


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Keep away from ignition sources
Environmental precautions:
Do not allow material to be released to the environment without official permits.
Methods and material for containment and cleanup:
Keep away from ignition sources.
Ensure adequate ventilation.
Do not flush with water or aqueous cleansing agents
Prevention of secondary hazards:
Keep away from ignition sources.
Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.


SECTION 7. HANDLING AND STORAGE

Handling
Precautions for safe handling
Handle under dry protective gas.
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure adequate ventilation.
Information about protection against explosions and fires:
Protect against electrostatic charges.
Substance/product is self ignitable.
Conditions for safe storage, including any incompatibilities
Storage
Requirements to be met by storerooms and receptacles:
No special requirements.
Information about storage in one common storage facility:
Store away from air.
Store away from water/moisture.
Further information about storage conditions:
Store under dry inert gas.
This product is moisture sensitive.
This product is air sensitive.
Keep container tightly sealed.
Store in cool, dry conditions in well-sealed containers.
Protect from humidity and water.
Specific end use(s)
No information available.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Control parameters
Components with limit values that require monitoring at the workplace:
Not required.
Additional information:
No data
Exposure controls
Personal protective equipment
Follow typical general protective and industrial hygiene measures for handling chemicals.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hands before breaks and at the end of work.
Breathing equipment:
Use suitable respirator when high concentrations are present.
Protection of hands:
Impervious gloves
Inspect gloves prior to use.
Suitability of gloves should be determined both by material and quality, the latter of which may vary by manufacturer.
Penetration time of glove material (in minutes)
No data available.
Eye protection:
Safety glasses
Full face protection
Body protection:
Protective work clothing


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties
Appearance:
Form: Powder
Color: Silver gray
Odor: Odorless
Odor threshold: No data available.
pH: N/A.
Melting point/range: 1474 °C (2685 °F)
Boiling point/range: 2700 °C (4892 °F)
Sublimation temperature / start: No data available.
Flammability (solid, gas):
Contact with water liberates extremely flammable gases.
Ignition temperature: No data available.
Decomposition temperature: No data available.
Auto igniting: Spontaneously flammable in air.
Danger of explosion: No data available.
Explosion limits:
Lower: No data available.
Upper: No data available.
Vapor pressure: N/A.
Density at 20 °C (68 °F): 8.795 g/cm³ (73.394 lbs/gal)
Relative density
No data available.
Vapor density
N/A.
Evaporation rate
N/A.
Solubility in Water (H2O): Contact with water releases flammable gases
Partition coefficient (n-octanol/water): No data available.
Viscosity:
Dynamic: N/A.
Kinematic: N/A.
Other information
No information available.


SECTION 10. STABILITY AND REACTIVITY

Reactivity
In contact with water releases flammable gases which may ignite spontaneously.
Catches fire spontaneously if exposed to air.
Chemical stability
Stable under recommended storage conditions.
Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to specifications.
Possibility of hazardous reactions
Spontaneously flammable in air.
Contact with water releases flammable gases
Conditions to avoid
No information available.
Incompatible materials:
Air
Oxidizing agents
Water/moisture
Hazardous decomposition products:
Metal oxide fume


SECTION 11. TOXICOLOGICAL INFORMATION

Information on toxicological effects
Acute toxicity:
N/A
LD/LC50 values that are relevant for classification:
No data
Skin irritation or corrosion:
May cause irritation
Eye irritation or corrosion:
May cause irritation
Sensitization:
No sensitizing effects known.
Germ cell mutagenicity:
N/A
Carcinogenicity:
No classification data on carcinogenic properties of this material is available from the EPA, IARC, NTP, OSHA or ACGIH.
Reproductive toxicity:
N/A
Specific target organ system toxicity - repeated exposure:
N/A
Specific target organ system toxicity - single exposure:
N/A
Aspiration hazard:
N/A
Subacute to chronic toxicity:
Lanthanons can cause delayed blood clotting leading to hemorrhages.
Exposure may also lead to sensitivity to heat, itching, increased awareness of odor and taste,
and liver damage.
Subacute to chronic toxicity:
N/A
Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.


SECTION 12. ECOLOGICAL INFORMATION

Toxicity
Aquatic toxicity:
No information available.
Persistence and degradability:
No information available.
Bioaccumulative potential:
No information available.
Mobility in soil:
No information available.
Additional ecological information:
General notes:
Do not allow material to be released to the environment without official permits.
Do not allow undiluted product or large quantities to reach ground water, water course or sewage system.
Avoid transfer into the environment.
Results of PBT and vPvB assessment:
PBT:
N/A.
vPvB:
N/A.
Other adverse effects
No information available.


SECTION 13. DISPOSAL CONSIDERATIONS

Waste treatment methods
Recommendation:
Consult state, local or national regulations to ensure proper disposal.
Uncleaned packagings:
Recommendation:
Disposal must be made according to official regulations.


SECTION 14. TRANSPORT INFORMATION

UN-Number
DOT, IMDG, IATA
UN1383
UN proper shipping name
DOT
Pyrophoric metals, n.o.s. (Holmium)
IMDG, IATA
PYROPHORIC METAL, N.O.S. (Holmium)
Transport hazard class(es)
DOT
Class
4.2 Substances liable to spontaneous combustion.
Label
4.2
Class
4.2 (S4) Substances liable to spontaneous combustion
Label
4.2
IMDG, IATA
Class
4.2 Substances liable to spontaneous combustion.
Label
4.2
Packing group
DOT, IMDG, IATA
I
Environmental hazards:
N/A.
Special precautions for user
Warning: Substances liable to spontaneous combustion
Segregation groups
Powdered metals
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
N/A.
Transport/Additional information:
DOT
Marine Pollutant (DOT):
No
UN "Model Regulation":
UN1383, Pyrophoric metals, n.o.s. (Holmium), 4.2, I


SECTION 15. REGULATORY INFORMATION

Safety, health and environmental regulations/legislation specific for the substance or mixture
GHS label elements
The product is classified and labeled in accordance with 29 CFR 1910 (OSHA HCS)
Hazard pictograms
GHS02
Signal word
Danger
Hazard statements
H250 Catches fire spontaneously if exposed to air.
H252 Self-heating in large quantities; may catch fire.
H260 In contact with water releases flammable gases which may ignite spontaneously.
Precautionary statements
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P222 Do not allow contact with air.
P231+P232 Handle under inert gas. Protect from moisture.
P370+P378 In case of fire: Use for extinction: CO2, sand, extinguishing powder.
P422 Store contents under inert gas.
P501 Dispose of contents/container in accordance with local/regional/
national/international regulations.
National regulations
All components of this product are listed in the U.S. Environmental Protection Agency Toxic Substances Control Act Chemical substance Inventory.
All components of this product are listed on the Canadian Non-Domestic Substances List (NDSL).
SARA Section 313 (specific toxic chemical listings)
Substance is not listed.
California Proposition 65
Prop 65 - Chemicals known to cause cancer
Substance is not listed.
Prop 65 - Developmental toxicity
Substance is not listed.
Prop 65 - Developmental toxicity, female
Substance is not listed.
Prop 65 - Developmental toxicity, male
Substance is not listed.
Information about limitation of use:
For use only by technically qualified individuals.
Other regulations, limitations and prohibitive regulations
Substance of Very High Concern (SVHC) according to the REACH Regulations (EC) No. 1907/2006.
Substance is not listed.
The conditions of restrictions according to Article 67 and Annex XVII of the Regulation (EC) No 1907/2006 (REACH) for the manufacturing, placing on the market and use must be observed.
Substance is not listed.
Annex XIV of the REACH Regulations (requiring Authorisation for use)
Substance is not listed.
Chemical safety assessment:
A Chemical Safety Assessment has not been carried out.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Holmium Powder

High purity holmium powderAmerican Elements specializes in producing high purity Holmium Powder with the smallest possible average grain sizes for use in preparation of pressed and bonded sputtering targets and in Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Powders are also useful in any application where high surface areas are desired such as water treatment and in fuel cell and solar applications. Nanoparticles also produce very high surface areas. Our standard powder particle sizes average in the range of - 325 mesh, - 100 mesh, 10-50 microns and submicron (< 1 micron). We can also provide many materials in the nanoscale range. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. We also produce Holmium as rod, ingot, pieces, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.

Holmium Powder Synonyms

Holmium particles, Holmium microparticles, Holmium micropowder, Holmium micro powder, Holmium micron powder, Holmium submicron powder, Holmium sub-micron powder, GF78567654, GF31028543, 45919

Chemical Identifiers

Linear Formula Ho
MDL Number MFCD00011049
EC No. 231-169-0
Beilstein/Reaxys No. N/A
Pubchem CID 23988
SMILES [Ho]
InchI Identifier InChI=1S/Ho
InchI Key KJZYNXUDTRRSPN-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Holmium

See more Holmium products. Holmium (atomic symbol: Ho, atomic number: 67) is a Block F, Group 3, Period 6 element with an atomic radius of 164.93032. Holmium Bohr ModelThe number of electrons in each of Holmium's shells is [2, 8, 18, 29, 8, 2] and its electron configuration is [Xe] 4f11 6s2. Elemental Holmium PictureThe holmium atom has a radius of 176 pm and its Covalent radius is 192±7 pm. Holmium was first discovered by Marc Delafontaine in 1878. In its elemental form, holmium has a silvery white appearance. It is relatively soft and malleable. It is stable in dry air at room temperature but rapidly oxidizes at elevated temperatures and in moist air. Holmium has unusual magnetic properties. Its name is derived from the Latin word Holmia meaning Stockholm.

TODAY'S TOP DISCOVERY!

March 18, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
Enhancing CO Oxidation: The Impact of a Nanoscale Metal Oxide Layer on Gold and Platinum Nanoparticle Catalysts

Enhancing CO Oxidation: The Impact of a Nanoscale Metal Oxide Layer on Gold and Platinum Nanoparticle Catalysts