Skip to main content

Holmium Sputtering Target

CAS #: 7440-60-0
Linear Formula:
Ho
MDL Number
MFCD00011049
EC No.:
231-169-0

ORDER

Product Product Code ORDER SAFETY DATA Technical data
(2N) 99% Holmium Sputtering Target HO-M-02-ST SDS > Data Sheet >
(3N) 99.9% Holmium Sputtering Target HO-M-03-ST SDS > Data Sheet >
(4N) 99.99% Holmium Sputtering Target HO-M-04-ST SDS > Data Sheet >
(5N) 99.999% Holmium Sputtering Target HO-M-05-ST SDS > Data Sheet >
WHOLESALE/SKU 0000-742-{{nid}}

Holmium Sputtering Target Properties (Theoretical)

Molecular Weight 164.93
Appearance Silvery
Melting Point 1474 °C
Boiling Point 2695°C
Density 8.795 gm/cc
Solubility in H2O N/A
Poisson's Ratio 0.231
Young's Modulus 64.8 GPa
Vickers Hardness 481 MPa
Tensile Strength N/A
Thermal Conductivity 0.162 W/cm/ K @ 298.2 K
Thermal Expansion (r.t.) (poly) 11.2 µm/(m·K)
Electrical Resistivity 87.0 microhm-cm @ 25°C
Electronegativity 1.2 Paulings
Specific Heat 0.0393 Cal/g/ K @ 25 °C
Heat of Vaporization 67 K-Cal/gm atom at 2695°C

Holmium Sputtering Target Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Precautionary Statements N/A
Risk Codes N/A
Safety Statements N/A
Transport Information NONH for all modes of transport
WGK Germany 3

About Holmium Sputtering Target

American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (High Purity (99.999%) Holmium (Ho) Sputtering TargetEuropean Pharmacopeia/British Pharmacopeia) and follows applicable ASTM testing standards. American Elements specializes in producing high purity Holmium Sputtering Targets with the highest possible density and smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Sputtering Targets for thin film are available monoblock or bonded with planar target dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devices as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. We offer all shapes and configurations of targets compatible with all standard guns including circular, rectangular, annular, oval, "dog-bone," rotatable (rotary), multi-tiled and others in standard, custom, and research sized dimensions. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. We also produce Holmium as rods, powder and plates. Other shapes are available by request.

Synonyms

N/A

Chemical Identifiers

Linear Formula Ho
Pubchem CID 23988
MDL Number MFCD00011049
EC No. 231-169-0
Beilstein/Reaxys No. N/A
SMILES [Ho]
InchI Identifier InChI=1S/Ho
InchI Key KJZYNXUDTRRSPN-UHFFFAOYSA-N
Chemical Formula
Molecular Weight
Standard InchI
Appearance
Melting Point
Boiling Point
Density

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Holmium products. Holmium (atomic symbol: Ho, atomic number: 67) is a Block F, Group 3, Period 6 element with an atomic radius of 164.93032. Holmium Bohr ModelThe number of electrons in each of Holmium's shells is [2, 8, 18, 29, 8, 2] and its electron configuration is [Xe] 4f11 6s2. Elemental Holmium PictureThe holmium atom has a radius of 176 pm and its Covalent radius is 192±7 pm. Holmium was first discovered by Marc Delafontaine in 1878. In its elemental form, holmium has a silvery white appearance. It is relatively soft and malleable. It is stable in dry air at room temperature but rapidly oxidizes at elevated temperatures and in moist air. Holmium has unusual magnetic properties. Its name is derived from the Latin word Holmia meaning Stockholm.