Skip to main content

Iron Concentrate

CAS #: 7439-89-6
Linear Formula:
Fe
MDL Number
MFCD00010999
EC No.:
231-096-4

ORDER

Product Product Code ORDER SAFETY DATA Technical data
(2N) 99% Iron Concentrate FE-M-02-CONC SDS > Data Sheet >
(3N) 99.9% Iron Concentrate FE-M-03-CONC SDS > Data Sheet >
(4N) 99.99% Iron Concentrate FE-M-04-CONC SDS > Data Sheet >
(5N) 99.999% Iron Concentrate FE-M-05-CONC SDS > Data Sheet >
WHOLESALE/SKU 0000-742-{{nid}}

Iron Concentrate Properties (Theoretical)

Molecular Weight 55.85
Appearance Gray
Melting Point 1535 °C
Boiling Point 2750 °C
Density kg/m3
Solubility in H2O N/A
Poisson's Ratio 0.29
Young's Modulus 211 GPa
Vickers Hardness 608 MPa
Tensile Strength N/A
Thermal Conductivity 0.804 W/cm/K @ 298.2 K
Thermal Expansion (25 °C) 11.8 µm·m-1·K-1
Electrical Resistivity 9.71 microhm-cm @ 20 °C
Electronegativity 1.8 Paulings
Specific Heat 0.106 Cal/g/K @ 25 °C
Heat of Vaporization 84.6 K-Cal/gm atom at 2750 °C

Iron Concentrate Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
Transport Information N/A

About Iron Concentrate

Iron ConcentrateAmerican Elements offers iron concentrate with a majority iron base component. Preparation of iron concentrate typically involves the removal of water from an iron solution. American Elements specializes in producing high purity Iron Concentrate with the smallest possible average grain sizes for use in preparation of pressed and bonded sputtering targets and in Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Iron concentrate is similar to powder in that it is made up of minute, dry particles of pure substance. Concentrate is also useful in any application where high surface areas are desired such as water treatment and in fuel cell and solar applications. Nanoparticles also produce very high surface areas. Our standard Concentrate particle sizes average in the range of - 325 mesh, - 100 mesh, 10-50 microns and submicron ( 1 micron). We can also provide many materials in the nanoscale range. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. We also produce Iron as rod, ingot, pieces, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request. Iron concentrate is advantageous for transportation since it reduces weight and volume. A solution can be reproduced at the time of usage with the addition of a solvent.

Synonyms

N/A

Chemical Identifiers

Linear Formula Fe
Pubchem CID 23925
MDL Number MFCD00010999
EC No. 231-096-4
Beilstein/Reaxys No. N/A
SMILES [Fe]
InchI Identifier InChI=1S/Fe
InchI Key XEEYBQQBJWHFJM-UHFFFAOYSA-N
Chemical Formula
Molecular Weight
Standard InchI
Appearance
Melting Point
Boiling Point
Density

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Iron products. Iron (atomic symbol: Fe, atomic number: 26) is a Block D, Group 8, Period 4 element with an atomic weight of 55.845. The number of electrons in each of Iron's shells is 2, 8, 14, 2 and its electron configuration is [Ar] 3d6 4s2. Iron Bohr ModelThe iron atom has a radius of 126 pm and a Van der Waals radius of 194 pm. Iron was discovered by humans before 5000 BC. In its elemental form, iron has a lustrous grayish metallic appearance. Iron is the fourth most common element in the Earth's crust and the most common element by mass forming the earth as a whole. Iron is rarely found as a free element, since it tends to oxidize easily; it is usually found in minerals such as magnetite, hematite, goethite, limonite, or siderite.Elemental Iron Though pure iron is typically soft, the addition of carbon creates the alloy known as steel, which is significantly stronger.