Skip to main content

Manganese Samples

CAS #: 7439-96-5
Linear Formula:
Mn
MDL Number
MFCD00011111
EC No.:
231-105-1

ORDER

Product Product Code ORDER SAFETY DATA Technical data
(2N) 99% Manganese Samples MN-M-02-SAMP SDS > Data Sheet >
(3N) 99.9% Manganese Samples MN-M-03-SAMP SDS > Data Sheet >
(4N) 99.99% Manganese Samples MN-M-04-SAMP SDS > Data Sheet >
(5N) 99.999% Manganese Samples MN-M-05-SAMP SDS > Data Sheet >
WHOLESALE/SKU 0000-742-{{nid}}

Manganese Samples Properties (Theoretical)

Molecular Weight 54.94
Appearance Silvery
Melting Point 1244 °C
Boiling Point 1962 °C
Density 7.21-7.44 g/cm3
Solubility in H2O N/A
Poisson's Ratio N/A
Young's Modulus 198 GPa
Vickers Hardness N/A
Tensile Strength N/A
Thermal Conductivity 0.0781 W/cm/K @ 298.2 K
Thermal Expansion (25 °C) 21.7 µm·m-1·K-1
Electrical Resistivity 185.0 microhm-cm @ 25 °C
Electronegativity 1.5 Paulings
Specific Heat 0.114 Cal/g/K @ 25 °C
Heat of Fusion 3.45 Cal/gm mole
Heat of Vaporization 53.7 K-Cal/gm atom at 1962 °C

Manganese Samples Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Precautionary Statements P210-P231 + P232-P235 + P410-P422
Flash Point Not applicable
Risk Codes N/A
Safety Statements N/A
RTECS Number N/A
Transport Information NONH
WGK Germany nwg

About Manganese Samples

Manganese SampleManganese samples are suitable for metallurgical analysis, chemical analysis, physical testing, mechanical testing, failure analysis, fire & flammability testing, contaminant identification and weatherization studies. Metallurgical testing is used to determine quality by analyzing the microstructure of a sample under a microscope. American Elements specializes in producing irregular shaped Manganese Samples with the highest possible density and smallest possible average grain sizes for use in Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Manganese samples are available in dimensions appropriate for numerous testing procedures. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. Manganese samples are suitable for metallurgical analysis, chemical analysis, physical testing, mechanical testing, failure analysis, fire & flammability testing, contaminant identification and weatherization studies. Metallurgical testing is used to determine quality by analyzing the microstructure of a sample under a microscope. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. We also produce Manganese as rod, ingot, powder, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request. A wide variety of American Elements products are available in sample form for materials and metallurgical testing procedures. Manganese samples vary in size and thickness.

Synonyms

N/A

Chemical Identifiers

Linear Formula Mn
Pubchem CID 23930
MDL Number MFCD00011111
EC No. 231-105-1
Beilstein/Reaxys No. N/A
SMILES [Mn]
InchI Identifier InChI=1S/Mn
InchI Key PWHULOQIROXLJO-UHFFFAOYSA-N
Chemical Formula
Molecular Weight
Standard InchI
Appearance
Melting Point
Boiling Point
Density

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Manganese products. Manganese (atomic symbol: Mn, atomic number: 25) is a Block D, Group 7, Period 4 element with an atomic weight of 54.938045. Manganese Bohr ModelThe number of electrons in each of Manganese's shells is [2, 8, 13, 2] and its electron configuration is [Ar] 3d5 4s2. The manganese atom has a radius of 127 pm and a Van der Waals radius of 197 pm. Manganese was first discovered by Torbern Olof Bergman in 1770 and first isolated by Johann Gottlieb Gahn in 1774. In its elemental form, manganese has a silvery metallic appearance. Elemental ManganeseIt is a paramagnetic metal that oxidizes easily in addition to being very hard and brittle. Manganese is found as a free element in nature and also in the minerals pyrolusite, braunite, psilomelane, and rhodochrosite. The name Manganese originates from the Latin word mangnes, meaning "magnet."