Nickel Carbonyl

CAS #:

Linear Formula:

Ni(CO)4

MDL Number:

MFCD00016250

EC No.:

236-669-2

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
Nickel Carbonyl
NI-CBL-01-LIQ
Pricing > SDS > Data Sheet >

Nickel Carbonyl Properties (Theoretical)

Compound Formula C4NiO4
Molecular Weight 170.73
Appearance Colorless Liquid
Melting Point -19.3 °C
Boiling Point 43 °C
Density 1.32 g/mL
Solubility in H2O 0.18 g/l (20 °C)
Monoisotopic Mass 169.915001 g/mol

Nickel Carbonyl Health & Safety Information

Signal Word Danger
Hazard Statements H224-H330-H351-H360
Hazard Codes F, T+
Precautionary Statements P210-P260-P280-P310+P310-P403+P235-P501
Risk Codes N/A
Safety Statements N/A
Transport Information UN12596.1/PG I
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 12/11/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Nickel Carbonyl

Product Number: All applicable American Elements product codes, e.g. NI-CBL-01-LIQ

CAS #: 13463-39-3

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture
GHS02 Flame
Flam. Liq. 1 H224 Extremely flammable liquid and vapor.
GHS06 Skull and crossbones
Acute Tox. 1 H330 Fatal if inhaled.
GHS08 Health hazard
Carc. 2 H351 Suspected of causing cancer.
Repr. 1B H360 May damage fertility or the unborn child.
Label elements
GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms

Flame - GHS02 Skull and Crossbones - GHS06 Health Hazard - GHS08

GHS02 GHS06 GHS08
Signal word Danger
Hazard-determining components of labeling:
tEtracarbonylnickel
Hazard statements
H224 Extremely flammable liquid and vapor.
H330 Fatal if inhaled.
H351 Suspected of causing cancer.
H360 May damage fertility or the unborn child.
Precautionary statements
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P260 Do not breathe dust/fume/gas/mist/vapors/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P422 Store contents under inert gas.
P403+P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 - 4)
Health = 4
Fire = 3
Reactivity = 0
HMIS-ratings (scale 0 - 4)
Health = *4
Fire = 3
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical characterization: Substances
CAS No. Description
13463-39-3 Tetracarbonylnickel
Identification number(s)
Index number: 028-001-00-1


SECTION 4. FIRST AID MEASURES

Description of first aid measures
General information:
Immediately remove any clothing soiled by the product.
Remove breathing apparatus only after contaminated clothing have been completely removed.
In case of irregular breathing or respiratory arrest provide artificial respiration.
After inhalation:
Supply fresh air or oxygen; call for doctor.
In case of unconsciousness place patient stably in side position for transportation.
After skin contact: Immediately wash with water and soap and rinse thoroughly.
After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
After swallowing: If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayed No further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.


SECTION 5. FIREFIGHTING MEASURES

Extinguishing media
Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents: Water with full jet
Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
Advice for firefighters
Protective equipment: Mouth respiratory protective device.


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures
Mount respiratory protective device.
Wear protective equipment. Keep unprotected persons away.
Environmental precautions:
Do not allow product to reach sewage system or any water course.
Prevent seepage into sewage system, workpits and cellars.
Inform respective authorities in case of seepage into water course or sewage system.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.


SECTION 7. HANDLING AND STORAGE

Handling:
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
Only handle and refill product in closed systems.
Prevent formation of aerosols.
Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Keep respiratory protective device available.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles: Store in a cool location.
Information about storage in one common storage facility: Not required.
Further information about storage conditions:
Keep receptacle tightly sealed.
Do not gas tight seal receptacle.
Store in cool, dry conditions in well sealed receptacles.
Protect from heat and direct sunlight.
Specific end use(s) No further relevant information available.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Additional information about design of technical systems: No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
13463-39-3 tetracarbonylnickel
PEL Long-term value: 0.007 mg/m³, 0.001 ppm
REL Long-term value: 0.007 mg/m³, 0.001 ppm
See Pocket Guide App. A
TLV Ceiling limit value: 0.12 mg/m³, 0.05 ppm as Ni
Additional information: The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
respiratory protective device that is independent of circulating air.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection:
Tightly sealed goggles


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties
General Information
Appearance:
Form: Liquid
Color: Colorless
Odor: Acrid
Odor threshold: Not determined.
pH-value: Not determined.
Change in condition
Melting point/Melting range: -19.3 °C (-3 °F)
Boiling point/Boiling range: 43 °C (109 °F)
Flash point: Not applicable.
Flammability (solid, gaseous): Not applicable.
Ignition temperature: 60 °C (140 °F)
Decomposition temperature: Not determined.
Auto igniting: Not determined.
Danger of explosion: Not determined.
Explosion limits:
Lower: 2 Vol %
Upper: 34 Vol %
Vapor pressure at 20 °C (68 °F): 480mm (30 hPa (360mm (23 mm Hg)
Density at 20 °C (68 °F): 1.32 g/cm³ (11.015 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water at 20 °C (68 °F): 0.18 g/l
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
Organic solvents: 0.0 %
VOC content: 0.0 g/l / 0.00 lb/gl
Other information No further relevant information available.


SECTION 10. STABILITY AND REACTIVITY

Reactivity No further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions No dangerous reactions known.
Conditions to avoid No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known.


SECTION 11. TOXICOLOGICAL INFORMATION

Information on toxicological effects
Acute toxicity:
LD/LC50 values that are relevant for classification:
Inhalative LC50/4 h 67 mg/l (mouse)
Primary irritant effect:
on the skin: No irritant effect.
on the eye: No irritating effect.
Sensitization: No sensitizing effects known.
Additional toxicological information:
Carcinogenic categories
IARC (International Agency for Research on Cancer)
13463-39-3 tetracarbonylnickel 1
NTP (National Toxicology Program)
13463-39-3 tetracarbonylnickel K
OSHA-Ca (Occupational Safety & Health Administration)
Substance is not listed.


SECTION 12. ECOLOGICAL INFORMATION

Toxicity
Aquatic toxicity: No further relevant information available.
Persistence and degradability No further relevant information available.
Behavior in environmental systems:
Bioaccumulative potential No further relevant information available.
Mobility in soil No further relevant information available.
Additional ecological information:
General notes: Not known to be hazardous to water.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.


SECTION 13. DISPOSAL CONSIDERATIONS

Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.


SECTION 14. TRANSPORT INFORMATION

UN-Number
DOT, IMDG, IATA UN1259
UN proper shipping name
DOT, IATA Nickel carbonyl
IMDG NICKEL CARBONYL, MARINE POLLUTANT
Transport hazard class(es)
DOT
Class 6.1 Toxic substances
Label 6.1, 3
IMDG
Class 6.1 Toxic substances
Label 6.1/3
IATA
Class 6.1 Toxic substances
Label 6.1 (3)
Packing group
DOT, IMDG, IATA I
Environmental hazards:
Marine pollutant: Yes
Symbol (fish and tree)
Special precautions for user Not applicable.
Poison inhalation hazard: Yes
Danger code (Kemler): 663
EMS Number: F-E,S-D
Stowage Category D
Stowage Code SW2 Clear of living quarters.
Segregation Code SG63 Stow "separated longitudinally by an intervening complete
compartment or hold from" Class 1.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
Transport/Additional information:
DOT
Quantity limitations On passenger aircraft/rail: Forbidden
On cargo aircraft only: Forbidden
Hazardous substance: 10 lbs, 4.54 kg
IMDG
Limited quantities (LQ) 0
Excepted quantities (EQ) Code: E5
Maximum net quantity per inner packaging: 1 ml
Maximum net quantity per outer packaging: 300 ml
UN "Model Regulation": UN 1259 NICKEL CARBONYL, 6.1 (3), I


SECTION 15. REGULATORY INFORMATION

Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
Substance is listed.
Section 313 (Specific toxic chemical listings):
Substance is listed.
TSCA (Toxic Substances Control Act):
Substance is listed.
Proposition 65
Chemicals known to cause cancer:
Substance is listed.
Chemicals known to cause reproductive toxicity for females:
Substance is not listed.
Chemicals known to cause reproductive toxicity for males:
Substance is not listed.
Chemicals known to cause developmental toxicity:
Substance is listed.
Carcinogenic categories
EPA (Environmental Protection Agency)
13463-39-3 tetracarbonylnickel B2
TLV (Threshold Limit Value established by ACGIH)
Substance is not listed.
NIOSH-Ca (National Institute for Occupational Safety and Health)
Substance is listed.
GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS02 GHS06 GHS08
Signal word Danger
Hazard-determining components of labeling:
tetracarbonylnickel
Hazard statements
H224 Extremely flammable liquid and vapor.
H330 Fatal if inhaled.
H351 Suspected of causing cancer.
H360 May damage fertility or the unborn child.
Precautionary statements
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P260 Do not breathe dust/fume/gas/mist/vapors/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P422 Store contents under inert gas.
P403+P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Nickel Carbonyl

Nickel Carbonyl is one of numerous organometallic compounds sold by American Elements under the trade name AE Organometallics™. Organometallics are useful reagent, catalyst, and precursor materials with applications in thin film deposition, industrial chemistry, pharmaceuticals, LED manufacturing, and others. American Elements supplies Nickel Carbonyl in most volumes including bulk quantities and also can produce materials to customer specifications. Please request a quote above for more information on pricing and lead time.

Nickel Carbonyl Synonyms

Nickel tetracarbonyl, tetracarbonylnickel

Chemical Identifiers

Linear Formula Ni(CO)4
MDL Number MFCD00016250
EC No. 236-669-2
Pubchem CID 26039
IUPAC Name carbon monoxide; nickel
SMILES [C-]#[O+].[C-]#[O+].[C-]#[O+].[C-]#[O+].[Ni]
InchI Identifier InChI=1S/4CO.Ni/c4*1-2;
InchI Key AWDHUGLHGCVIEG-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Nickel

See more Nickel products. Nickel (atomic symbol: Ni, atomic number: 28) is a Block D, Group 4, Period 4 element with an atomic weight of 58.6934. Nickel Bohr ModelThe number of electrons in each of nickel's shells is [2, 8, 16, 2] and its electron configuration is [Ar]3d8 4s2. Nickel was first discovered by Alex Constedt in 1751. The nickel atom has a radius of 124 pm and a Van der Waals radius of 184 pm. In its elemental form, nickel has a lustrous metallic silver appearance. Nickel is a hard and ductile transition metal that is considered corrosion-resistant because of its slow rate of oxidation. Elemental NickelIt is one of four elements that are ferromagnetic and is used in the production of various type of magnets for commercial use. Nickel is sometimes found free in nature but is more commonly found in ores. The bulk of mined nickel comes from laterite and magmatic sulfide ores. The name originates from the German word kupfernickel, which means "false copper" from the illusory copper color of the ore.

TODAY'S TOP DISCOVERY!

December 11, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
Physics student builds improvised polarimeter using simple circuitry, polarizing film, and LEGO toy bricks

Physics student builds improvised polarimeter using simple circuitry, polarizing film, and LEGO toy bricks