Optimization of copper, lead and cadmium biosorption onto newly isolated bacterium using a Box-Behnken design.

Title Optimization of copper, lead and cadmium biosorption onto newly isolated bacterium using a Box-Behnken design.
Authors A. Choi?ska-Pulit; J. Sobolczyk-Bednarek; W. ?aba
Journal Ecotoxicol Environ Saf
DOI 10.1016/j.ecoenv.2017.12.008
Abstract

Due to the progressive development of industrial and technological activities, heavy metal contamination is increasing each year and it poses a serious health and environmental risk. Microorganisms are capable of removing heavy metals from a contaminated environment. In this work, 51 microbial strains were isolated from heavy metal contaminated water and soil. The JAW1 strain, identified as Pseudomonas azotoformans, was selected and applied in bioremediation of the specific mixture of metals (Cd, Cu, and Pb) in an aqueous medium. The Box-Behnken design was used to optimize the biosorption process, with three factors: pH, initial metal concentration, concentration of the biosorbent. For the strain P. azotoformans JAW1, the optimal conditions were pH = 6.0, 25mg/L of each metal and 2g/L, following removal levels were achieved: Cd 44,67%; Cu 63,32%; Pb 78,23%. The possible interactions of cell-metal ions were evaluated using FT-IR analysis. The study indicated the presence of groups, which may be responsible for bonding of metal ions. The studies conducted on bioremediation mechanisms indicated that metal accumulation could occur on the cell surface (biosorption) where the amount of adsorbed metals reached: Cd 98,57%, Cu 69,76%, Pb 88,58%. P. azotoformans JAW1 exhibited a potential for application in the bioremediation of mining wastewater with complex metal contaminations.

Citation A. Choi?ska-Pulit; J. Sobolczyk-Bednarek; W. ?aba.Optimization of copper, lead and cadmium biosorption onto newly isolated bacterium using a Box-Behnken design.. Ecotoxicol Environ Saf. 2018;149:275283. doi:10.1016/j.ecoenv.2017.12.008

Related Elements

Cadmium

See more Cadmium products. Cadmium (atomic symbol: Cd, atomic number: 48) is a Block D, Group 12, Period 5 element with an atomic weight of 112.411. Cadmium Bohr ModelThe number of electrons in each of Cadmium's shells is 2, 8, 18, 18, 2 and its electron configuration is [Kr]4d10 5s2. The cadmium atom has a radius of 151 pm and a Van der Waals radius of 230 pm. Cadmium was discovered and first isolated by Karl Samuel Leberecht Hermann and Friedrich Stromeyer in 1817. In its elemental form, cadmium has a silvery bluish gray metallic appearance. Cadmium makes up about 0.1 ppm of the earth's crust. Elemental CadmiumNo significant deposits of cadmium containing ores are known, however, it is sometimes found in its metallic form. It is a common impurity in zinc ores and is isolated during the production of zinc. Cadmium is a key component in battery production and particular pigments and coatings due to its distinct yellow color. Cadmium oxide is used in phosphors for television picture tubes. The name Cadmium originates from the Latin word 'cadmia' and the Greek word 'kadmeia'.

Copper

See more Copper products. Copper Bohr Model Copper (atomic symbol: Cu, atomic number: 29) is a Block D, Group 11, Period 4 element with an atomic weight of 63.546. The number of electrons in each of copper's shells is 2, 8, 18, 1 and its electron configuration is [Ar]3d10 4s1. The copper atom has a radius of 128 pm and a Van der Waals radius of 186 pm. Copper was first discovered by Early Man prior to 9000 BC. In its elemental form, copper has a reddish-orange metallic and lustrous appearance. Of all pure metals, only silver Elemental Copperhas a higher electrical conductivity. The origin of the word copper comes from the Latin word 'cuprium' which translates as "metal of Cyprus," as the Mediterranean island of Cyprus was known as an ancient source of mined copper..

Lead

Lead Bohr ModelSee more Lead products. Lead (atomic symbol: Pb, atomic number: 82) is a Block P, Group 14, Period 6 element with an atomic radius of 207.2. The number of electrons in each of Lead's shells is [2, 8, 18, 32, 18, 4] and its electron configuration is [Xe] 4f14 5d10 6s2 6p2. The lead atom has a radius of 175 pm and a Van der Waals radius of 202 pm. In its elemental form, lead has a metallic gray appearance. Lead occurs naturally as a mixture of four stable isotopes: 204Pb (1.48%), 206Pb (23.6%), 207Pb (22.6%), and 208Pb (52.3%). Elemental LeadLead is obtained mainly from galena (PbS) by a roasting process. Anglesite, cerussite, and minim are other common lead containing minerals. Lead does occur as a free element in nature, but it is rare. It is a dense, soft metal that is very resistant to corrosion and poorly conductive compared to other metals. Its density and low melting point make it useful in applications such as electrolysis and industrial materials.