Skip to main content

Titanium(IV) Oxide Powder

CAS #: 13463-67-7
Linear Formula:
TiO2
MDL Number
MFCD00011269
EC No.:
236-675-5

ORDER

Product Product Code ORDER SAFETY DATA Technical data
(2N) 99% Titanium(IV) Oxide Powder TI4-OX-02-P SDS > Data Sheet >
(3N) 99.9% Titanium(IV) Oxide Powder TI4-OX-03-P SDS > Data Sheet >
(4N) 99.99% Titanium(IV) Oxide Powder TI4-OX-04-P SDS > Data Sheet >
(5N) 99.999% Titanium(IV) Oxide Powder TI4-OX-05-P SDS > Data Sheet >
WHOLESALE/SKU 0000-742-{{nid}}

Titanium(IV) Oxide Powder Properties (Theoretical)

Compound Formula O2Ti
Molecular Weight 79.9378 g/mol
Appearance White crystalline powder
Melting Point 1,843° C (3,349° F)
Boiling Point 2,972° C (5,382° F)
Density 4.23 g/cm3
Solubility in H2O N/A
Exact Mass 79.9378 g/mol
Monoisotopic Mass 79.937776 Da

Titanium(IV) Oxide Powder Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
RTECS Number XR2275000
Transport Information NONH for all modes of transport
WGK Germany nwg

About Titanium(IV) Oxide Powder

Oxide IonAmerican Elements specializes in producing spray dry and non-spray dry high purity Titanium(IV) Oxide Powder with the smallest possible average grain sizes for use in preparation of pressed and bonded sputtering targets and in Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Powders are also useful in any application where high surface areas are desired such as water treatment and in fuel cell and solar applications. Nanoparticles also produce very high surface areas. Our standard powder particle sizes average in the range of - 325 mesh, - 100 mesh, 10-50 microns and submicron ( 1 micron) and our spray dried powder with binder provides an extremely narrow High Purity (99.999%) Titanium(IV) Oxide (TiO2) Powderparticle size distribution (PSD) for use in thermal and plasma spray guns and other coating applications. We can also provide many materials in the nanoscale range. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. We also produce Titanium(IV) Oxide as pellets, pieces, tablets, and sputtering target. Oxide compounds are not conductive to electricity. However, certain perovskite structured oxides are electronically conductive finding application in the cathode of solid oxide fuel cells and oxygen generation systems. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Other shapes are available by request.

Synonyms

Dioxotitanium, Titanium dioxide, Titania, Titanium(IV) dioxide, Titanic oxide, Titanium peroxide, Titanium oxide

Chemical Identifiers

Linear Formula TiO2
Pubchem CID 26042
MDL Number MFCD00011269
EC No. 236-675-5
IUPAC Name dioxotitanium
Beilstein/Reaxys No. N/A
SMILES O=[Ti]=O
InchI Identifier InChI=1S/2O.Ti
InchI Key GWEVSGVZZGPLCZ-UHFFFAOYSA-N
Chemical Formula
Molecular Weight
Standard InchI
Appearance
Melting Point
Boiling Point
Density

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Titanium products. Titanium (atomic symbol: Ti, atomic number: 22) is a Block D, Group 4, Period 4 element with an atomic weight of 47.867. The number of electrons in each of Titanium's shells is [2, 8, 10, 2] and its electron configuration is [Ar] 3d2 4s2. Titanium Bohr ModelThe titanium atom has a radius of 147 pm and a Van der Waals radius of 187 pm. Titanium was discovered by William Gregor in 1791 and first isolated by Jöns Jakob Berzelius in 1825. In its elemental form, titanium has a silvery grey-white metallic appearance. Titanium's properties are chemically and physically similar to zirconium, both of which have the same number of valence electrons and are in the same group in the periodic table. Elemental TitaniumTitanium has five naturally occurring isotopes: 46Ti through 50Ti, with 48Ti being the most abundant (73.8%). Titanium is found in igneous rocks and the sediments derived from them. It is named after the word Titanos, which is Greek for Titans.