Skip to main content

Ultra Thin Lithium Nanoscale Foil

CAS #: 7439-93-2
Linear Formula:
Li
MDL Number
MFCD00134051
EC No.:
231-102-5

ORDER

Product Product Code ORDER SAFETY DATA Technical data
(2N) 99% Ultra Thin Lithium Nanoscale Foil LI-M-02-FN SDS > Data Sheet >
(3N) 99.9% Ultra Thin Lithium Nanoscale Foil LI-M-03-FN SDS > Data Sheet >
(4N) 99.99% Ultra Thin Lithium Nanoscale Foil LI-M-04-FN SDS > Data Sheet >
(5N) 99.999% Ultra Thin Lithium Nanoscale Foil LI-M-05-FN SDS > Data Sheet >
WHOLESALE/SKU 0000-742-{{nid}}

Ultra Thin Lithium Nanoscale Foil Properties (Theoretical)

Molecular Weight 6.941
Appearance Silvery White
Melting Point 180.54 °C
Boiling Point 1342 °C
Density 0.534 g/cm3
Solubility in H2O N/A
Poisson's Ratio N/A
Young's Modulus 4.9 GPa
Vickers Hardness N/A
Tensile Strength N/A
Thermal Conductivity 0.848 W/cm/K @ 298-C.2 K
Thermal Expansion (25 °C) 46 µm·m-1·K-1
Electrical Resistivity 8.55 microhm-cm @ 0 °C
Electronegativity 1.0 Paulings
Specific Heat 0.85 Cal/g/K @ 25 °C
Heat of Fusion 1.10 Cal/gm mole
Heat of Vaporization 32.48 K-Cal/gm atom at 1342 °C

Ultra Thin Lithium Nanoscale Foil Health & Safety Information

Signal Word Danger
Hazard Statements H260-H314
Hazard Codes F,C
Precautionary Statements P231+P232-P260-P303+P361+P353-P305+P351+P338-P501
Flash Point Not applicable
Risk Codes 14/15-34
Safety Statements 8-43-45
RTECS Number OJ5540000
Transport Information UN 1415 4.3/PG 1
WGK Germany 2
GHS Pictogram
Image
Flammable - GHS02
,
Image
Corrosive - GHS05

About Ultra Thin Lithium Nanoscale Foil

American Elements' Nanometal™ nanoscale foil manufacturing unit produces ultra thin foil as thin as only 50 nm thick in diameters up to 910 mm. Typically, foils are in thicknesses from 20 nm to 1000 nm, 1 micron, 2 micron, and up to a few microns thick. Nanometal™ ultra thin foil can also be produced on a substrate with a parting agent to permit removal by floating and can then be mounted on frames.  Frames may be washers, rings, or more-complicated assemblies. Nanometal™ is one of the many ultra high purity metal forms available from American Elements for semiconductor and other electronic applications and for use in coating and thin film Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Organometallic and Chemical Vapor Deposition (MOCVD) in specific applications such as fuel cells and solar energy. We also produce metallic nanopowders and metals by crystallization for this purpose. For foils >1 micron thick see our Lithium Foil page. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopeia/British Pharmacopeia) and follows applicable ASTM testing standards. We also produce Lithium as rods, powder and plates. Other shapes are available by request.

Synonyms

N/A

Chemical Identifiers

Linear Formula Li
Pubchem CID 3028194
MDL Number MFCD00134051
EC No. 231-102-5
Beilstein/Reaxys No. N/A
SMILES [Li]
InchI Identifier InChI=1S/Li
InchI Key WHXSMMKQMYFTQS-UHFFFAOYSA-N
Chemical Formula
Molecular Weight
Standard InchI
Appearance
Melting Point
Boiling Point
Density

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Lithium Bohr ModelSee more Lithium products. Lithium (atomic symbol: Li, atomic number: 3) is a Block S, Group 1, Period 2 element with an atomic weight of 6.94. The number of electrons in each of Lithium's shells is [2, 1] and its electron configuration is [He] 2s1. The lithium atom has a radius of 152 pm and a Van der Waals radius of 181 pm. Lithium was discovered by Johann Arvedson in 1817 and first isolated by William Thomas Brande in 1821. The origin of the name Lithium comes from the Greek wordlithose which means "stone." Lithium is a member of the alkali group of metals. It has the highest specific heat and electrochemical potential of any element on the period table and the lowest density of any elements that are solid at room temperature. Elemental LithiumCompared to other metals, it has one of the lowest boiling points. In its elemental form, lithium is soft enough to cut with a knife its silvery white appearance quickly darkens when exposed to air. Because of its high reactivity, elemental lithium does not occur in nature. Lithium is the key component of lithium-ion battery technology, which is becoming increasingly more prevalent in electronics.