Electrochemical Properties of Micron-Sized SnO Anode Using a Glyme-Based Electrolyte for Sodium-Ion Battery.

Title Electrochemical Properties of Micron-Sized SnO Anode Using a Glyme-Based Electrolyte for Sodium-Ion Battery.
Authors H. Kim; S.W. Lee; K.Y. Lee; J.W. Park; H.S. Ryu; K.K. Cho; G.B. Cho; K.W. Kim; J.H. Ahn; H.J. Ahn
Journal J Nanosci Nanotechnol
DOI 10.1166/jnn.2018.15690
Abstract

Tin monoxide (SnO) anodes are promising candidates for use in sodium-ion batteries because of their high theoretical capacities and stable cycle performance. In previous reports, electrodes with excellent performance have been prepared by using nano-sized SnO particles. However, the synthesis of nano-sized SnO particles is complex, time-consuming, and expensive. In this paper, an anode of micron-sized SnO is prepared by using commercial micron-sized SnO particles. The electrode exhibits a reversible capacity of 450 mAh g-1 in the 1st cycle at a current rate of 100 mA g-1. We used a tetraethylene glycol dimethyl ether (TEGDME)-based electrolyte, which is well known for its superior electrochemical performance in sodium-ion batteries. The mechanism of operation of the anode containing micron-sized SnO particles has been confirmed by a detailed study using X-ray diffraction (XRD), scanning electron microscopy (SEM), and electrochemical impedance spectroscopy (EIS). During initial discharge, the SnO changed to Sn and sodium oxide, and the surface of the electrode became covered with a film. The electrode composed of micron-sized SnO is a potential candidate for use in sodium-ion batteries.

Citation H. Kim; S.W. Lee; K.Y. Lee; J.W. Park; H.S. Ryu; K.K. Cho; G.B. Cho; K.W. Kim; J.H. Ahn; H.J. Ahn.Electrochemical Properties of Micron-Sized SnO Anode Using a Glyme-Based Electrolyte for Sodium-Ion Battery.. J Nanosci Nanotechnol. 2018;18(9):64226426. doi:10.1166/jnn.2018.15690

Related Elements

Sodium

Sodium Bohr ModelSee more Sodium products. Sodium (atomic symbol: Na, atomic number: 11) is a Block D, Group 5, Period 4 element with an atomic weight of 22.989769. The number of electrons in each of Sodium's shells is [2, 8, 1] and its electron configuration is [Ne] 3s1. The sodium atom has a radius of 185.8 pm and a Van der Waals radius of 227 pm. Sodium was discovered and first isolated by Sir Humphrey Davy in 1807. In its elemental form, sodium has a silvery-white metallic appearance. It is the sixth most abundant element, making up 2.6 % of the earth's crust. Sodium does not occur in nature as a free element and must be extracted from its compounds (e.g., feldspars, sodalite, and rock salt). The name Sodium is thought to come from the Arabic word suda, meaning "headache" (due to sodium carbonate's headache-alleviating properties), and its elemental symbol Na comes from natrium, its Latin name.

Tin

Tin Bohr ModelSee more Tin products. Tin (atomic symbol: Sn, atomic number: 50) is a Block P, Group 14, Period 5 element with an atomic weight of 118.710. The number of electrons in each of tin's shells is 2, 8, 18, 18, 4 and its electron configuration is [Kr] 4d10 5s2 5p2. The tin atom has a radius of 140.5 pm and a Van der Waals radius of 217 pm.In its elemental form, tin has a silvery-gray metallic appearance. It is malleable, ductile and highly crystalline. High Purity (99.9999%) Tin (Sn) MetalTin has nine stable isotopes and 18 unstable isotopes. Under 3.72 degrees Kelvin, Tin becomes a superconductor. Applications for tin include soldering, plating, and such alloys as pewter. The first uses of tin can be dated to the Bronze Age around 3000 BC in which tin and copper were combined to make the alloy bronze. The origin of the word tin comes from the Latin word Stannum which translates to the Anglo-Saxon word tin. For more information on tin, including properties, safety data, research, and American Elements' catalog of tin products, visit the Tin element page.

Related Forms & Applications