| Product | Product Code | Order or Specifications |
| (5N) 99.999% Silicon Telluride Powder | SI-TE-05-P |  |
| (5N) 99.999% Silicon Telluride Ingot | SI-TE-05-I | |
| (5N) 99.999% Silicon Telluride Chunk | SI-TE-05-CK | |
| (5N) 99.999% Silicon Telluride Lump | SI-TE-05-L | |
| (5N) 99.999% Silicon Telluride Sputtering Target | SI-TE-05-ST | |
| (5N) 99.999% Silicon Telluride Wafer | SI-TE-05- WSX | |
| CHEMICAL IDENTIFICATION |
Formula | CAS No. | PubChem SID |
PubChem CID | MDL No. | EC No | IUPAC Name | Beilstein Re. No. |
SMILES Identifier |
InChI Identifier |
InChI Key |
| SiTe | 12067-53-7 | 139229 | Tellanylsilane | [SiH3][TeH] | InChI=1S/H4SiTe/c1-2/h2H,1H3 | DCDONASXPYTWRS-UHFFFAOYSA-N |
| Compound Formula | Mol. Wt. | Appearance | Density | Monoisotopic Mass | Charge | MSDS | |
155.68 |
g/cm3 | 161.914 g/mol | 161.914 g/mol | 0 | Safety Data Sheet |
Silicon Telluride (SiTe) is a crystal grown product generally immediately available in most volumes. Technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.
Silicon is a Block P, Group 14, Period 3 element. The number of electrons in each of Silicon's shells is 2, 8, 4 and its electronic configuration is [Ne] 3s2 3p2. In its elemental form silicon's CAS number is 7440-21-3. The silicon atom has a radius of 117.6.pm and it's Van der Waals radius is 210.pm. Silicon is not toxic but can cause chronic respiratory problems if inhaled as a fine silica or silicate dust. Asbestos silicates are carcinogenic. Silicon is
one of man's most useful elements. It makes up 25.7% of the earth's crust, by weight, and is the second most abundant element, being exceeded only by oxygen. The Czochralski process is commonly used to produce single crystals of silicon used for solid-state or semiconductor devices. Silica, as sand, is a principal ingredient of glass, one of the most inexpensive of materials with excellent mechanical, optical, thermal, and electrical properties. Silicon is available as metal and compounds with purities from 99% to 99.9999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. Ultra high purity silicon can be doped with boron, gallium, phosphorus , or arsenic to produce silicon for use in 
transistors, solar cells, rectifiers, and other solid-state devices which are used extensively in the electronics and space-age industries. Hydrogenated amorphous silicon has shown promise in producing economical cells for converting solar energy into electricity. Silcones are important products of silicon. They range from liquids to hard, glasslike solids with many useful properties. Silicon was first discovered by Jons Berzelius in 1823. The name Silicon originates from the Latin word "silex" which means flint or hard stone. See Silicon research below.
Tellurium is a Block P, Group 16, Period 5 element. The number of electrons in each of Tellurium's shells is 2, 8, 18, 18, 6 and its electronic configuration is [Kr] 4d10 5s2 5p4. In its elemental form tellurium's CAS number is 13494-80-9. The tellurium atom has a radius of 143.2.pm and it's Van der Waals radius is 206.pm. Tellurium is a p-type semiconductor, and shows greater conductivity in certain directions, depending on alignment of the atoms. It is grown in crystalline form with other elements such as indium telluride. Its conductivity increases slightly with exposure to light which makes many tellurides candidates for solar energyapplications. Tellurium improves the machinability of copper and stainless steel, and its addition to lead decreases the corrosive action of sulfuric acid on lead and improves its strength and hardness. 
Tellurium is used as 
a basic ingredient in blasting caps, and is added to cast iron for chill control. Tellurium is used in ceramics. Bismuth telluride has been used in thermoelectric devices. Iron is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. Tellurium was first discovered by Franz Muller von Reichenstein in 1782. The name Tellurium originates from the Greek word 'Tellus' meaning Earth. See Tellurium research below.
American Elements semi conducting materials are crystal structures produced from ultra high purity starting materials synthesized by our high purity production facility which includes several large electric muffle furnaces, a tube furnace for hydrogen reduction, 50 gallon glass-lined Pfaudler reactors supported by our analytical laboratory containing X-ray diffraction, SEM, AA, BET surface area, and ICP Spectrometry for trace metals analysis. See a discussion of American Elements Ultra High Purity and Analytical capabilities. See Crystal Growth for processes used to fabricate semiconductor materials, which include:
-
Crystal "pulling" by the Czochaiski method for production of semiconductor materials
-
Flux growth and gradient freeze
-
Directional solidification of fluorites using both the Bridgman-Stockbarger and float zoning techniques
 |
 |
|---|
Safety & Handling |
| Signal Word | Hazard Statements | Hazard Codes | Risk Codes | Safety Precautions | RTECS No. | Transport Information | WGK Germany |
| Danger | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
Synonyms for Silicon Telluride Include: |
Silicon Monotelluride |
||
Tellanylsilane |
||
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Material Safety Data Sheet (MSDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes.
|
 |
|---|
Customers for this product have also looked at: |
|
Search by Material, Product Name, Product Code, CAS Number, Formula, Element, Anion, Form, EC Number, MDL Number or PubChem ID. |
|
