Tin Coil

High Purity Sn Coil
CAS 7440-31-5


Product Product Code Order or Specifications
(2N) 99% Tin Coil SN-M-02-CL Contact American Elements
(3N) 99.9% Tin Coil SN-M-03-CL Contact American Elements
(4N) 99.99% Tin Coil SN-M-04-CL Contact American Elements
(5N) 99.999% Tin Coil SN-M-05-CL Contact American Elements
(6N) 99.9999% Tin Coil SN-M-06-CL Contact American Elements

CHEMICAL
IDENTIFIER
Formula CAS No. PubChem SID PubChem CID MDL No. EC No Beilstein
Re. No.
SMILES
Identifier
InChI
Identifier
InChI
Key
Sn 7440-31-5 166491 N/A MFCD00133862  231-141-8 N/A [Sn] InChI=1S/Sn ATJFFYVFTNAWJD-UHFFFAOYSA-N

PROPERTIES Mol. Wt. Appearance Density Tensile Strength Melting Point Boiling Point Thermal Conductivity Electrical Resistivity Eletronegativity Specific Heat Heat of Vaporization Heat of Fusion MSDS
118.69 Yellow 7310 kg/m³ N/A 231.93 °C 2602 °C 0.668 W/cm/K @ 298.2 K  11.0 microhm-cm @ °C 1.8 Paulings  0.0510 Cal/g/K @ 25 °C 70 K-Cal/gm atom at 2270 °C 1.72 Cal/gm mole  Safety Data Sheet

 Tin CoilTin coils are formed wires wound around a core to create a wrapped helix pattern. American Elements specializes in producing high purity uniform shaped Tin Coil with the highest possible density for use in semiconductor, Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Coils are wrapped wire structures of varying thickness and lengths. Metal Coils are available in custom sizes with strict tolerances (See ASTM requirements) and alpha values (conductive resistance) for uses such as gas detection and thermometry tolerances (Also see Nanoparticles) . Please contact us to fabricate custom coil alloys and gauge sizes. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We can also provide Rod outside this range. See research below. We also produce Tin as powder, ingot, pieces, pellets, disc, granules and in compound forms, such as oxide. Other shapes are available by request. Tin coils are used as components in many electrical devices.

Tin Bohr ModelTin (Sn) atomic and molecular weight, atomic number and elemental symbolTin (atomic symbol: Sn, atomic number: 50) is a Block P, Group 14, Period 5 element with an atomic weight of 118.710. The number of electrons in each of tin's shells is 2, 8, 18, 18, 4 and its electron configuration is [Kr] 4d10 5s2 5p2. The tin atom has a radius of 140.5 pm and a Van der Waals radius of 217 pm.In its elemental form, tin has a silvery-gray metallic appearance. It is malleable, ductile and highly crystalline. High Purity (99.9999%) Tin (Sn) MetalTin has nine stable isotopes and 18 unstable isotopes. Under 3.72 degrees Kelvin, Tin becomes a superconductor. Applications for tin include soldering, plating, and such alloys as pewter. The first uses of tin can be dated to the Bronze Age around 3000 BC in which tin and copper were combined to make the alloy bronze. The origin of the word tin comes from the Latin word Stannum which translates to the Anglo-Saxon word tin. For more information on tin, including properties, safety data, research, and American Elements' catalog of tin products, visit the Tin Information Center.

HEALTH, SAFETY & TRANSPORTATION INFORMATION
Warning
H319-H335 
Xi
36/37
26
XP7320000
N/A
3
Exclamation Mark-Acute Toxicity        

CUSTOMERS FOR TIN COIL HAVE ALSO LOOKED AT
Bismuth Indium Tin Alloy Tin Acetate Tin Metal Tin Oxide Tin Chloride
Tin Pellets Tin Oxide Pellets Gold Tin Alloy Tin Nitrate Tin Acetylacetonate
Tin Foil Tin Rod Tin Nanoparticles Tin Powder Tin Sputtering Target
Show Me MORE Forms of Tin

PACKAGING SPECIFICATIONS FOR BULK & RESEARCH QUANTITIES
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Material Safety Data Sheet (MSDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes.


Have a Question? Ask a Chemical Engineer or Material Scientist
Request an MSDS or Certificate of Analysis





German   Korean   French   Japanese   Spanish   Chinese (Simplified)   Portuguese   Russian   Chinese (Taiwan)  Italian   Turkish   Polish   Dutch   Czech   Swedish   Hungarian   Danish   Hebrew

Production Catalog Available in 36 Countries & Languages


Recent Research & Development for Tin

  • Nguyen Dang Nam, Mahesh Vaka, Nguyen Tran Hung, Corrosion behavior of TiN, TiAlN, TiAlSiN-coated 316L stainless steel in simulated proton exchange membrane fuel cell environment, Journal of Power Sources, Volume 268, 5 December 2014
  • M.A. Deyab, Hydrogen generation by tin corrosion in lactic acid solution promoted by sodium perchlorate, Journal of Power Sources, Volume 268, 5 December 2014
  • Feng Gu, Wenjuan Huang, Shufen Wang, Xing Cheng, Yanjie Hu, Chunzhong Li, Improved photoelectric conversion efficiency from titanium oxide-coupled tin oxide nanoparticles formed in flame, Journal of Power Sources, Volume 268, 5 December 2014
  • C. Tholander, B. Alling, F. Tasnádi, J.E. Greene, L. Hultman, Effect of Al substitution on Ti, Al, and N adatom dynamics on TiN(001), (011), and (111) surfaces, Surface Science, Volume 630, December 2014
  • A. Elrefaey, J. Janczak-Rusch, M.M. Koebel, Direct glass-to-metal joining by simultaneous anodic bonding and soldering with activated liquid tin solder, Journal of Materials Processing Technology, Volume 214, Issue 11, November 2014
  • Xiang Lei Shi, Jian Tao Wang, Jian Nong Wang, Roughness improvement of fluorine-doped tin oxide thin films by using different alcohol solvents, Journal of Alloys and Compounds, Volume 611, 25 October 2014
  • K. Vijayarangamuthu, Shyama Rath, Nanoparticle size, oxidation state, and sensing response of tin oxide nanopowders using Raman spectroscopy, Journal of Alloys and Compounds, Volume 610, 15 October 2014
  • Caitian Gao, Xiaodong Li, Xupeng Zhu, Lulu Chen, Zemin Zhang, Youqing Wang, Zhenxing Zhang, Huigao Duan, Erqing Xie, Branched hierarchical photoanode of titanium dioxide nanoneedles on tin dioxide nanofiber network for high performance dye-sensitized solar cells, Journal of Power Sources, Volume 264, 15 October 2014
  • Shu Wei, Dong-Dong Han, Li Guo, Yinyan He, Hong Ding, Yong-Lai Zhang, Feng-Shou Xiao, In situ immobilization of tin dioxide nanoparticles by nanoporous polymers scaffold toward monolithic humidity sensing devices, Journal of Colloid and Interface Science, Volume 431, 1 October 2014
  • G. Kilibarda, S. Schlabach, V. Winkler, M. Bruns, T. Hanemann, D.V. Szabó, Electrochemical performance of tin-based nano-composite electrodes using a vinylene carbonate-containing electrolyte for Li-ion cells, Journal of Power Sources, Volume 263, 1 October 2014
  • Kehua Dai, Hui Zhao, Zhihui Wang, Xiangyun Song, Vince Battaglia, Gao Liu, Toward high specific capacity and high cycling stability of pure tin nanoparticles with conductive polymer binder for sodium ion batteries, Journal of Power Sources, Volume 263, 1 October 2014
  • Atasheh Soleimani-Gorgani, Ehsan Bakhshandeh, Farhood Najafi, Effect of dispersant agents on morphology and optical–electrical properties of nano indium tin oxide ink-jet ink, Journal of the European Ceramic Society, Volume 34, Issue 12, October 2014
  • Bhupendra Singh, Ji-Hye Kim, Jun-Young Park, Sun-Ju Song, Ionic conductivity of Mn2+ doped dense tin pyrophosphate electrolytes synthesized by a new co-precipitation method, Journal of the European Ceramic Society, Volume 34, Issue 12, October 2014
  • Shihyun Ahn, Anh Huy Tuan Le, Sunbo Kim, Cheolmin Park, Chonghoon Shin, Youn-Jung Lee, Jaehyeong Lee, Chaehwan Jeong, Vinh Ai Dao, Junsin Yi, The effects of orientation changes in indium tin oxide films on performance of crystalline silicon solar cell with shallow-emitter, Materials Letters, Volume 132, 1 October 2014
  • Faheem K. Butt, Chuanbao Cao, Tariq Mahmood, Faryal Idrees, Muhammad Tahir, Waheed S. Khan, Zulfiqar Ali, Muhammad Rizwan, M. Tanveer, Sajad Hussain, Imran Aslam, Dapeng Yu, Metal-catalyzed synthesis of ultralong tin dioxide nanobelts: Electrical and optical properties with oxygen vacancy-related orange emission, Materials Science in Semiconductor Processing, Volume 26, October 2014
  • Zhou Xu, Peng Chen, Zhenlong Wu, Feng Xu, Guofeng Yang, Bin Liu, Chongbin Tan, Lin Zhang, Rong Zhang, Youdou Zheng, Influence of thermal annealing on electrical and optical properties of indium tin oxide thin films, Materials Science in Semiconductor Processing, Volume 26, October 2014
  • L.P. Chikhale, J.Y. Patil, A.V. Rajgure, R.C. Pawar, I.S. Mulla, S.S. Suryavanshi, Synthesis, characterization and LPG response of Pd loaded Fe doped tin oxide thick films, Journal of Alloys and Compounds, Volume 608, 25 September 2014
  • Monika Madej, The effect of TiN and CrN interlayers on the tribological behavior of DLC coatings, Wear, Volume 317, Issues 1–2, 15 September 2014
  • Bhim Singh Rathore, Deepak Pathania, Styrene–tin (IV) phosphate nanocomposite for photocatalytic degradation of organic dye in presence of visible light, Journal of Alloys and Compounds, Volume 606, 5 September 2014
  • Brian Cardineau, Ryan Del Re, Miles Marnell, Hashim Al-Mashat, Michaela Vockenhuber, Yasin Ekinci, Chandra Sarma, Daniel A. Freedman, Robert L. Brainard, Photolithographic properties of tin-oxo clusters using extreme ultraviolet light (13.5 nm), Microelectronic Engineering, Volume 127, 5 September 2014