CZTS

CAS #:

Linear Formula:

Cu2ZnSnS4

MDL Number:

N/A

EC No.:

N/A

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Copper Zinc Tin Sulfide Sputtering Target
CUZN-SNS-02-ST
Pricing > SDS > Data Sheet >
(3N) 99.9% Copper Zinc Tin Sulfide Sputtering Target
CUZN-SNS-03-ST
Pricing > SDS > Data Sheet >
(4N) 99.99% Copper Zinc Tin Sulfide Sputtering Target
CUZN-SNS-04-ST
Pricing > SDS > Data Sheet >
(5N) 99.999% Copper Zinc Tin Sulfide Sputtering Target
CUZN-SNS-05-ST
Pricing > SDS > Data Sheet >

Copper Zinc Tin Sulfide Sputtering Target Properties (Theoretical)

Compound Formula Cu2ZnSnS4
Molecular Weight 439.47
Appearance Dark green to black solid
Melting Point 990 °C
Boiling Point N/A
Density 4.56 g g/cm3
Solubility in H2O Insoluble
Crystal Phase / Structure tetragonal

Copper Zinc Tin Sulfide Sputtering Target Health & Safety Information

Signal Word Warning
Hazard Statements H315-H319-H335
Hazard Codes Xi
Precautionary Statements P261-P305+P351-P304+P340
Risk Codes N/A
Safety Statements N/A
Transport Information NONH for all modes of transport
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 07/03/2020
Date Revised: 05/15/2015

SECTION 1. IDENTIFICATION

Product Name: Copper Zinc Tin Sulfide Sputtering Target

Product Number: All applicable American Elements product codes, e.g. CUZN-SNS-02-ST , CUZN-SNS-03-ST , CUZN-SNS-04-ST , CUZN-SNS-05-ST

CAS #: 12158-89-3

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Signal Word: Warning

Exclamation Mark - GHS07

Hazard Statements:
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
Precautionary Statements:
P261 Avoid breathing dust/fume/vapor
P305+P351 If in eyes: Rinse cautiously with water for several minutes.
P304+P340 If inhaled: Remove person to fresh air
HMIS
Health Ratings (0-4):
Health: 1
Flammability: 1
Physical: 1


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Family: Ceramic
Additional Names: CZTS
Copper zinc tin sulfide(Cu2ZnSnS4):
Percentage: 100 wt%
CAS#: 12158-89-3
EC #: NA


SECTION 4. FIRST AID MEASURES

General Treatment:
Seek medical attention if symptoms persist.
Special Treatment:
None
Important Symptoms:
None
Inhalation:
Remove victim to fresh air. Supply oxygen if breathing is difficult.
Ingestion:
Give one to two glasses of water and induce vomiting.
Never induce vomiting or give anything by mouth to an unconscious person.
Skin:
Wash affected area with mild soap and water. Remove any contaminated clothing.
Eyes:
Flush eyes with water, blinking often for several minutes.
Remove contact lenses if present and easy to do. Continue rinsing


SECTION 5. FIREFIGHTING MEASURES

Flammability:
Non-flammable
Flash Point:
N/A
Autoignition Temperature:
N/A
Extinguishing Media:
No special restrictions –use suitable extinguishing agent for surrounding material and type of fire.
Spec. Fire Fighting Procedure:
Use full-face, self-contained breathing apparatus with full protective clothing to prevent contact with skin and eyes.


SECTION 6. ACCIDENTAL RELEASE MEASURES

If Material Is Released/Spilled:
Wear appropriate respiratory and protective equipment specified in special protection information. Isolate spill area and provide ventilation. Vacuum up spill using a high efficiency particulate
absolute (HEPA) air filter and place in a closed container for disposal. Take care not to raise dust.
Environmental Precautions:
Isolate runoff to prevent environmental pollution.


SECTION 7. HANDLING AND STORAGE

Handling Conditions:
Wash thoroughly after handling.
Storage Conditions:
Store in a cool dry place in a tightly sealed container.
Work/Hygienic Maintenance:
Do not use tobacco or food in work area. Wash thoroughly before eating and smoking. Do not blow dust off clothing or skin with compressed air.
Ventilation:
Provide sufficient ventilation to maintain concentration at or below threshold limit.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Permissible Exposure Limits:
1.0 mg/m3 as Cu dust
Threshold Limit Value:
1.0 mg/m3 as Cu dust
Special Equipment:
None
Respiratory Protection:
Dust Respirator, NIOSH approved
Protective Gloves:
Rubber gloves
Eye Protection:
Safety glasses or goggles
Body Protection:
Protective work clothing. Wear close-toed shoes and long sleeves/pants.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Color: Dark greenish grey
Form: Powder, Granules, Pellets, Sputtering target, Custom parts
Odor: Odorless
Water Solubility: Insoluble
Boiling Point: N/A
Melting Point: 990°C
Density: 4.56 g/cc
Molecular weight: 439.471 g/mol


SECTION 10. STABILITY AND REACTIVITY

Stability:
Stable under recommended storage conditions
Reacts With:
Oxidizing agents, Acids
Incompatible Conditions:
None
Hazardous Decomposition
Products:
Metal oxide fume, Hydrogen sulfide, Sulfur dioxide


SECTION 11. TOXICOLOGICAL INFORMATION

Potential Health Effects:
Eyes: May cause serious irritation
Skin: May cause irritation
Ingestion: May cause irritation
Inhalation: May cause irritation
Chronic:
Copper compounds may be irritating to the skin, eyes and respiratory tract. They may cause metal fume fever, hemolysis of the red blood cells and injury to the liver, lungs, kidneys and pancreas. Ingestion may also cause vomiting, gastric pain, dizziness, anemia, cramps, convulsions, shock, coma and death. Copper solutions may cause sensitization reactions.
Signs & Symptoms: N/A
Aggravated Medical Conditions: N/A
Median Lethal Dose: >2 mg/kg as ZnS for rat by mouth
Carcinogen: N/A


SECTION 12. ECOLOGICAL INFORMATION

Ecological data is not available.


SECTION 13. DISPOSAL CONSIDERATIONS

Dispose of in accordance with local, state, national, and international regulations.


SECTION 14. TRANSPORT INFORMATION

Hazardous:
Not hazardous for transportation.
Hazard Class:
N/A
Packing Group:
N/A
UN Number:
N/A
Proper Shipping Name:
N/A


SECTION 15. REGULATORY INFORMATION

Sec 302 Extremely Hazardous:
No
Sec 304 Reportable Quantities:
N/A
Sec 313 Toxic Chemicals:
Yes


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2018 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Copper Zinc Tin Sulfide Sputtering Target

American Elements specializes in producing high purity Copper Zinc Tin Sulfide Sputtering Targets with the highest possible density High Purity (99.99%) Copper Zinc Tin Sulfide Sputtering Targetand smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard sputtering targets for thin film deposition are available monoblock or bonded with planar target dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devices as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. Rotary (cylindrical), round, rectangular, square, ring, annular, oval, "dog-bone" and other shaped targets are available in standard, custom, and research sized dimensions. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. Please request a quote above for more information on lead time and pricing.

Copper Zinc Tin Sulfide Sputtering Target Synonyms

CZTS, Copper Zinc Tin Sulphide, CuZnSnS, Kesterite, Cu2(Zn,Fe)SnS

Chemical Identifiers

Linear Formula Cu2ZnSnS4
MDL Number N/A
EC No. N/A
Pubchem CID 92026538

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Payment Methods

American Elements accepts checks, wire transfers, ACH, most major credit and debit cards (Visa, MasterCard, AMEX, Discover) and Paypal.

For the convenience of our international customers, American Elements offers the following additional payment methods:

SOFORT bank tranfer payment for Austria, Belgium, Germany and SwitzerlandJCB cards for Japan and WorldwideBoleto Bancario for BraziliDeal payments for the Netherlands, Germany, Austria, Belgium, Italy, Poland, Spain, Switzerland, and the United KingdomGiroPay for GermanyDankort cards for DenmarkElo cards for BrazileNETS for SingaporeCartaSi for ItalyCarte-Bleue cards for FranceChina UnionPayHipercard cards for BrazilTROY cards for TurkeyBC cards for South KoreaRuPay for India

Related Elements

See more Copper products. Copper Bohr Model Copper (atomic symbol: Cu, atomic number: 29) is a Block D, Group 11, Period 4 element with an atomic weight of 63.546. The number of electrons in each of copper's shells is 2, 8, 18, 1 and its electron configuration is [Ar] 3d10 4s1. The copper atom has a radius of 128 pm and a Van der Waals radius of 186 pm. Copper was first discovered by Early Man prior to 9000 BC. In its elemental form, copper has a red-orange metallic luster appearance. Of all pure metals, only silver Elemental Copperhas a higher electrical conductivity.The origin of the word copper comes from the Latin word 'cuprium' which translates as "metal of Cyprus." Cyprus, a Mediterranean island, was known as an ancient source of mined copper.

See more Sulfur products. Sulfur (or Sulphur) (atomic symbol: S, atomic number: 16) is a Block P, Group 16, Period 3 element with an atomic radius of 32.066. Sulfur Bohr ModelThe number of electrons in each of Sulfur's shells is 2, 8, 6 and its electron configuration is [Ne] 3s2 3p4. In its elemental form, sulfur has a light yellow appearance. The sulfur atom has a covalent radius of 105 pm and a Van der Waals radius of 180 pm. In nature, sulfur can be found in hot springs, meteorites, volcanoes, and as galena, gypsum, and epsom salts. Sulfur has been known since ancient times but was not accepted as an element until 1777, when Antoine Lavoisier helped to convince the scientific community that it was an element and not a compound.

Tin Bohr ModelSee more Tin products. Tin (atomic symbol: Sn, atomic number: 50) is a Block P, Group 14, Period 5 element with an atomic weight of 118.710. The number of electrons in each of tin's shells is 2, 8, 18, 18, 4 and its electron configuration is [Kr] 4d10 5s2 5p2. The tin atom has a radius of 140.5 pm and a Van der Waals radius of 217 pm.In its elemental form, tin has a silvery-gray metallic appearance. It is malleable, ductile and highly crystalline. High Purity (99.9999%) Tin (Sn) MetalTin has nine stable isotopes and 18 unstable isotopes. Under 3.72 degrees Kelvin, Tin becomes a superconductor. Applications for tin include soldering, plating, and such alloys as pewter. The first uses of tin can be dated to the Bronze Age around 3000 BC in which tin and copper were combined to make the alloy bronze. The origin of the word tin comes from the Latin word Stannum which translates to the Anglo-Saxon word tin. For more information on tin, including properties, safety data, research, and American Elements' catalog of tin products, visit the Tin element page.

See more Zinc products. Zinc (atomic symbol: Zn, atomic number: 30) is a Block D, Group 12, Period 4 element with an atomic weight of 65.38. The number of electrons in each of zinc's shells is 2, 8, 18, 2, and its electron configuration is [Ar] 3d10 4s2. Zinc Bohr ModelThe zinc atom has a radius of 134 pm and a Van der Waals radius of 210 pm. Zinc was discovered by Indian metallurgists prior to 1000 BC and first recognized as a unique element by Rasaratna Samuccaya in 800. Zinc was first isolated by Andreas Marggraf in 1746. In its elemental form, zinc has a silver-gray appearance. It is brittle at ordinary temperatures but malleable at 100 °C to 150 °C.Elemental Zinc It is a fair conductor of electricity, and burns in air at high red producing white clouds of the oxide. Zinc is mined from sulfidic ore deposits. It is the 24th most abundant element in the earth's crust and the fourth most common metal in use (after iron, aluminum, and copper). The name zinc originates from the German word "zin," meaning tin.

TODAY'S SCIENCE POST!

July 03, 2020
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day

Physicists Have Observed Light Flowing Like a River, And It's Beautiful