Strontium Titanate (Iron Doped): AMERICAN ELEMENTS Supplier & Tech Info

Fe:SrTiO3 is a crystalline solid used as a semiconductor and in photo optic applications.American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia)and follows applicable ASTM testing standards.Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Strontium is a Block S, Group 2, Period 5 element. The number of electrons in each of Strontium's shells is 2, 8, 18, 8, 2 and its electronic configuration is [Kr] 5s². In its elemental form strontium's CAS number is 7440-24-6. The strontium atom has a radius of 215.1.pm and it's Van der Waals radius is 200.pm. The non-radioactive isotopes of Strontium are not toxic. Strontium has low tech applications as an additive to flares and pyrotechnics because of the bright crimson flame produced by its salts. Strontium is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. It also has many high technology applications because of its high refractive index as a titanate in glass, as a "getter" in electron tubes and as a dopant for numerous perovskite formulations to produce cathodes for oxygen generation or solid oxide fuel cells. Historically the primary use of strontium was to produce CRT glass for color television and computer tubes. Strontium was first discovered by A. Crawford in 1790. Strontium was named after the Scottish town it was discovered in, Strontian. See Strontium research below.

Titanium is a Block D, Group 4, Period 4 element. The number of electrons in each of Titanium's shells is 2, 8, 10, 2 and its electronic configuration is [Ar] 3d² 4s². In its elemental form titanium's CAS number is 7440-32-6. The titanium atom has a radius of 144.8.pm and it's Van der Waals radius is 200.pm. Titanium metal is not considered to be toxic although titanium as metal shavings or powder is considered a fire hazard. In its metallic form it is not only very strong and light weight, but also highly resistant to corrosion. Thus it can be found in numerous aerospace and military applications. In its oxide form it used in low grades to produce a white pigment. Titanium is the bases for numerous commercially essential compound groups, such as titanium titanates in electronic and di-electric formulations and in crystal growth for ruby and sapphire lasers. Titanium information, including Technical Data, Safety Data and its high purity properties, research, applications and other useful facts are discussed here. Scientific facts such as the atomic structure, ionization energy , abundance on Earth, conductivity and thermal properties are included. Titanium was first discovered by William Gregor in 1791. Titanium was named after the word Titanos which is Greek for Titans. See Titanium research below. Titanium was named after the word Titanos which is Greek for Titans. See Titanium research below.

Iron is a Block D, Group 8, Period 4 element. The number of electrons in each of Iron's shells is 2, 8, 14, 2 and its electronic configuration is [Ar] 3d⁶ 4s². In its elemental form iron's CAS number is 7439-89-6. The iron atom has a radius of 124.1.pm and it's Van der Waals radius is 200.pm. Iron is not toxic. Iron is the most commonly used metal for commercial applications due to its hardness, historical availability and low cost. Once used on its own, it is now alloyed with nickel and other elements to produce steel and other high strength, non-corrosive structural metals. Iron as a metal and as its many compounds has numerous uses. It is a primary colorant in glass and ceramics. It is a catalyst. It is the basis for low grade magnets and because of its magnetic properties is used extensively in memory tape. Recent applications for Iron nanoparticles include in water treatment of carbon tetrachloride in contaminated groundwater, magnetic data storage and resonance imaging (MRI) and in certain alloy and catalyst applications. Iron can also be introduced into processes using iron foil, pellets, rod and wire by thin film Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Organometallic and Chemical Vapor Deposition (MOCVD) for specific applications such as fuel cells and solar energy. Iron is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. Iron was first discovered by Early Man.See Iron research below.

American Elements semi conducting materials are crystal structures produced from ultra high purity starting materials synthesized by our high purity production facility which includes several large electric muffle furnaces, a tube furnace for hydrogen reduction, 50 gallon glass-lined Pfaudler reactors supported by our analytical laboratory containing X-ray diffraction, SEM, AA, BET surface area, and ICP Spectrometry for trace metals analysis. See a discussion of American Elements Ultra High Purity and Analytical capabilities. See Crystal Growth for processes used to fabricate semiconductor materials, which include:

Crystal "pulling" by the Czochaiski method for production of semiconductor materials
Flux growth and gradient freeze
Directional solidification of fluorites using both the Bridgman-Stockbarger and float zoning techniques