American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopeia/British Pharmacopeia) and follows applicable ASTM testing standards.See safety data and research below and pricing/lead time above. American Elements specializes in producing Titanium Boards in various thicknesses and sizes. Most Boards are produced from cast Ingots for use in coating and thin film Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Organometallic and Chemical Vapor Deposition (MOCVD) for specific applications such as fuel cells and solar energy. Thickness can range from 0.04" to 0.25" for all metals. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We also produce Titanium as rods, powder and plates. Other shapes are available by request.
Titanium is a Block D, Group 4, Period 4 element. The number of electrons in each of Titanium's shells is 2, 8, 10, 2 and its electronic configuration is [Ar] 3d2 4s2. In its elemental form titanium's CAS number is 7440-32-6. The titanium atom has a radius of 144.8.pm and it's Van der Waals radius is 200.pm. Titanium metal is not considered to be toxic although titanium as metal shavings or powder is considered a fire hazard. In its metallic form it is not only very strong and light weight, but also highly resistant to corrosion. Thus it can be found in numerous aerospace and military applications. In its oxide form it used in low grades to produce a white pigment. Titanium is the bases for numerous commercially essential compound groups, such as titanium titanates in electronic and di-electric formulations and in crystal growth for ruby and sapphire lasers. Titanium information, including Technical Data, Safety Data and its high purity properties, research, applications and other useful facts are discussed here. Scientific facts such as the atomic structure, ionization energy , abundance on Earth, conductivity and thermal properties are included. Titanium was first discovered by William Gregor in 1791. Titanium was named after the word Titanos which is Greek for Titans. See Titanium research below.
PACKAGING SPECIFICATIONS FOR BULK & RESEARCH QUANTITIES
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Material Safety Data Sheet (MSDS). Bullion and bar forms are best if purchasing solely for physical possession and risk exposure.
Anticancer efficacy enhancement and attenuation of side effects of doxorubicin with titanium dioxide nanoparticles.
Chen Y, Wan Y, Wang Y, Zhang H, Jiao Z.
Int J Nanomedicine. 2011;6:2321-6. Epub 2011 Oct 18.
PMID:
22072869
[PubMed - in process]
Keyhole Cochlear Implantation: Current Status.
Black B.
Otol Neurotol. 2011 Nov 8. [Epub ahead of print]
PMID:
22072266
[PubMed - as supplied by publisher]
Characterization of a hydroxyapatite sputtered film subject to hydrothermal treatment using FE-SEM and STEM.
Ozeki K, Aoki H, Masuzawa T.
Biomed Mater Eng. 2011 Jan 1;21(3):179-89.
PMID:
22072082
[PubMed - in process]
In vitro evaluation of cytotoxicity of permanent prosthetic materials.
Sabaliauskas V, Juciute R, Bukelskiene V, Rutkunas V, Trumpaite-Vanagiene R, Puriene A.
Stomatologija. 2011;13(3):75-80.
PMID:
22071414
[PubMed - in process]
Effect of ionic products of dicalcium silicate coating on osteoblast differentiation and collagen production via TGF-ß1 pathway.
Li J, Wei L, Sun J, Guan G.
J Biomater Appl. 2011 Nov 9. [Epub ahead of print]
PMID:
22071351
[PubMed - as supplied by publisher]
Reconstruction of defects of maxillary sinus wall after removal of a huge odontogenic lesion using prebended 3D titanium-mesh and CAD/CAM technique - Methodology article -
Stoetzer M, Rana M, Von See C, Eckardt AM, Gellrich NC.
Head Face Med. 2011 Nov 9;7(1):21. [Epub ahead of print]
PMID:
22070833
[PubMed - as supplied by publisher]
Total Synthesis of (-)-Virginiamycin M2: Application of Crotylsilanes Accessed by Enantioselective Rh(II) or Cu(I) Promoted Carbenoid Si-H Insertion.
Wu J, Panek JS.
J Org Chem. 2011 Nov 9. [Epub ahead of print]
PMID:
22070230
[PubMed - as supplied by publisher]
Reduced stress shielding with limited micromotions using a carbon fibre composite biomimetic hip stem: a finite element model.
Caouette C, Yahia LH, Bureau MN.
Proc Inst Mech Eng H. 2011 Sep;225(9):907-19.
PMID:
22070028
[PubMed - in process]
Numerical simulation of bone remodelling around dental implants.
Ojeda J, Martínez-Reina J, García-Aznar JM, Domínguez J, Doblaré M.
Proc Inst Mech Eng H. 2011 Sep;225(9):897-906.
PMID:
22070027
[PubMed - in process]
[Application of titanium plate and Teflon patch in chest wall reconstruction after sternal. tumor resection].
Wu X, Chen M, Yu F.
Zhongguo Xiu Fu Chong Jian Wai Ke Za Zhi. 2011 Oct;25(10):1224-6. Chinese.
PMID:
22069979
[PubMed - in process]
Dietary Exposure Estimates of 14 Trace Elements in Xuanwei and Fuyuan, Two High Lung Cancer Incidence Areas in China.
Zhang L, Lv J, Liao C.
Biol Trace Elem Res. 2011 Nov 9. [Epub ahead of print]
PMID:
22068732
[PubMed - as supplied by publisher]
Comparative approach to capture bacterial diversity of coastal waters.
Na H, Kim OS, Yoon SH, Kim Y, Chun J.
J Microbiol. 2011 Oct;49(5):729-40. Epub 2011 Nov 9.
PMID:
22068488
[PubMed - in process]
Combined Use of Titanium Mesh and Resorbable PLLA-PGA Implant in the Treatment of Large Orbital Floor Fractures.
Magana FG, Arzac RM, De Hilario Aviles L.
J Craniofac Surg. 2011 Nov 5. [Epub ahead of print]
PMID:
22067850
[PubMed - as supplied by publisher]
No improvement in long-term wear and revision rates with the second-generation Biomet cup (RingLoc) in young patients.
Boesenach B, van der Heide HJ, Nelissen RG.
Acta Orthop. 2011 Nov 9. [Epub ahead of print]
PMID:
22066563
[PubMed - as supplied by publisher]
Clinical outcomes of TS-1 chemotherapy for advanced and recurrent gastric cancer.
Lee SR, Kim HO, Yoo CH.
J Korean Surg Soc. 2011 Sep;81(3):163-8. Epub 2011 Sep 26.
PMID:
22066117
[PubMed]
Melanosis ilei induced by prolonged charcoal ingestion.
Kim GM, Jun EJ, Kim YC, Park JM, Hong SI, Cheung DY, Kim JI, Lee YS.
J Korean Surg Soc. 2011 Jul;81(1):66-9. Epub 2011 Jul 11.
PMID:
22066103
[PubMed]
The mixed-valent titanium phosphate, Li(2)Ti(2)(PO(4))(3), dilithium dititanium(III/IV) tris-(orthophosphate).
Kee Y, Lee SS, Yun H.
Acta Crystallogr E Struct Rep Online. 2011 Sep 1;67(Pt 9):i49. Epub 2011 Aug 17.
PMID:
22065701
[PubMed]
Transition from Anodic Titania Nanotubes to Nanowires: Arising from Nanotube Growth to Application in Dye-Sensitized Solar Cells.
Sun L, Zhang S, Wang X, Sun XW, Ong DY, Wang X, Zhao D.
Chemphyschem. 2011 Nov 7. doi: 10.1002/cphc.201100450. [Epub ahead of print]
PMID:
22065460
[PubMed - as supplied by publisher]
Influence of metal ions on human lymphocytes and the generation of titanium-specific T-lymphocytes.
Chan E, Cadosch D, Gautschi OP, Sprengel K, Filgueira L.
J Appl Biomater Biomech. 2011 May-Aug;9(2):137-43. doi: 10.5301/JABB.2011.8567.
PMID:
22065391
[PubMed - in process]
Material Safety Data Sheet
1 Identification of substance
Product details
Trade name Titanium Ingot
2 Composition/Data on components:
Chemical characterization: Designation: (CAS#)
Titanium (CAS# 7440-45-1); 100%
Identification number(s):
EINECS Number: 231-154-9
3 Hazards identification
Hazard designation: F Highly flammable
Information pertaining to particular dangers for man and environment
R 11 Highly flammable.
R 15 Contact with water liberates extremely flammable gases.
4 First aid measures
After inhalation
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
Seek immediate medical advice.
After skin contact
Instantly wash with water and soap and rinse thoroughly.
Seek immediate medical advice.
After eye contact
Rinse opened eye for several minutes under running water. Then consult doctor.
After swallowing Seek immediate medical advice.
5 Fire fighting measures
Suitable extinguishing agents
Special powder for Oxide fires. Do not use water.
For safety reasons unsuitable extinguishing agents
Water.
Carbon dioxide
Protective equipment:
Wear self-contained breathing apparatus.
Wear full protective suit.
Measures for environmental protection:
Do not allow material to be released to the environment without proper governmental permits.
Measures for cleaning/collecting:
Ensure adequate ventilation.
Do not flush with water or aqueous cleansing agents
Keep away from ignition sources.
Additional information:
See Section 7 for information on safe handling
See section 8 for information on personal protection equipment.
See Section 13 for information on disposal.
7 Handling and storage
Handling
Information for safe handling:
Keep containers tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation/exhaustion at the workplace.
Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Storage
Requirements to be met by storerooms and containers:
Store in cool location.
Information about storage in one common storage facility:
Do not store together with oxidizing and acidic materials.
Store away from water.
Store away from air.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed containers.
8 Exposure controls and personal protection
Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Components with critical values that require monitoring at the workplace:
Not required.
Additional information: No data
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures should be adhered to in handling the chemicals.
Keep away from foodstuffs, beverages and food.
Instantly remove any soiled and impregnated garments.
Wash hands during breaks and at the end of the work.
Breathing equipment: Use breathing protection with high concentrations.
Protection of hands: Impervious gloves
Eye protection:
Safety glasses
Full face protection
Face protection
Body protection: Protective work clothing.
9 Physical and chemical properties:
General Information
Form: Solid.
Colour: Grey
Smell: Odourless
Value/Range Unit Method
Change in condition
Melting point/Melting range: 795 ° C
Boiling point/Boiling range: 3468 ° C
Sublimation temperature / start: Not determined
Flash point: Not applicable
Inflammability (solid, gaseous) Highly flammable.
Contact with water liberates extremely flammable gases.
Ignition temperature: Not determined
Decomposition temperature: Not determined
Critical values for explosion:
Lower: Not determined
Upper: Not determined
Steam pressure: Not determined
Density at 20 ° C 6.67 g/cm³
Solubility in / Miscibility with
Water: Not determined
10 Stability and reactivity
Thermal decomposition / conditions to be avoided:
No decomposition if used and stored according to specifications.
Materials to be avoided:
Water/moisture
Acids
Oxidizing agents
Oxygen
Dangerous reactions:
Contact with water releases flammable gases
Reacts with moist air
Contact with acids releases flammable gases
Reacts with oxidizing agents
Dangerous products of decomposition: Oxide oxide
11 Toxicological information
Acute toxicity:
Primary irritant effect:
on the skin: Irritant for skin and mucous membranes.
on the eye: Irritant effect.
Sensitization: No sensitizing effect known.
Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.
No classification data on carcinogenic properties of this material is available from the EPA, IARC, NTP, OSHA or ACGIH.
12 Ecological information:
General notes:
Do not allow material to be released to the environment without proper governmental permits.
Water hazard class 1 (Self-assessment): slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water bodies or sewage system.
13 Disposal considerations
Product:
Recommendation
Consult state, local or national regulations for proper disposal.
Hand over to disposers of hazardous waste.
Must be specially treated under adherence to official regulations.
Uncleaned packagings:
Recommendation:
Disposal must be made according to official regulations.
14 Transport information
Land transport ADR/RID and GGVS/GGVE (cross-border/domestic)
ADR/RID-GGVS/E Class: 4.1 (F3) Flammable solids.
Kemler Number: 40
UN-Number: 1333
Packaging group: II
Label 4.1
Designation of goods: 1333 Titanium
Maritime transport IMDG/GGVSea:
IMDG/GGVSea Class: 4.1
UN Number: 1333
Label 4.1
Packaging group: II
Correct technical name: Titanium
Air transport ICAO-TI and IATA-DGR:
ICAO/IATA Class: 4.1
UN/ID Number: 1333
Label 4.1
Packaging group: II
Correct technical name: Titanium
15 Regulatory information
Designation according to EC guidelines:
Code letter and hazard designation of product: F Highly flammable
Risk phrases:
11 Highly flammable.
15 Contact with water liberates extremely flammable gases.
Safety phrases:
7/8 Keep container tightly closed and dry.
43 In case of fire, use Oxidelic extinguishing powder. Never use water.
National regulations
Information about limitation of use:
For use only by technically qualified individuals.
Employment restrictions concerning young persons must be observed.
Water hazard class:
Water hazard class 1 (Self-assessment): slightly hazardous for water.
16 Other information:
Employers should use this information only as a supplement to other information gathered by them, and should make independent judgement of suitability of this information to ensure proper use and protect the health and safety of employees. This information is furnished without warranty, and any use of the product not in conformance with this Material Safety Data Sheet, or in combination with any other product or process, is the responsibility of the user.
Proud sponsors of Aeromat 2012. Please join us and our customers & co-sponsors Boeing and ATI on
June 18-20, 2012
in Charlotte, North Carolina
American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopeia/British Pharmacopeia) and follows applicable ASTM testing standards.See safety data and research below and pricing/lead time above. American Elements specializes in producing Titanium Boards in various thicknesses and sizes. Most Boards are produced from cast Ingots for use in coating and thin film Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Organometallic and Chemical Vapor Deposition (MOCVD) for specific applications such as fuel cells and solar energy. Thickness can range from 0.04" to 0.25" for all metals. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We also produce Titanium as rods, powder and plates. Other shapes are available by request.
Titanium is a Block D, Group 4, Period 4 element. The number of electrons in each of Titanium's shells is 2, 8, 10, 2 and its electronic configuration is [Ar] 3d2 4s2. In its elemental form titanium's CAS number is 7440-32-6. The titanium atom has a radius of 144.8.pm and it's Van der Waals radius is 200.pm. Titanium metal is not considered to be toxic although titanium as metal shavings or powder is considered a fire hazard. In its metallic form it is not only very strong and light weight, but also highly resistant to corrosion. Thus it can be found in 
numerous aerospace and military applications. In its oxide form it used in low grades to produce a white pigment. Titanium is the bases for numerous commercially essential compound groups, such as 
titanium titanates in electronic and di-electric formulations and in crystal growth for ruby and sapphire lasers. Titanium information, including Technical Data, Safety Data and its high purity properties, research, applications and other useful facts are discussed here. Scientific facts such as the atomic structure, ionization energy , abundance on Earth, conductivity and thermal properties are included. Titanium was first discovered by William Gregor in 1791. Titanium was named after the word Titanos which is Greek for Titans. See Titanium research below.
