Zinc Fluoride Sputtering Target
ZnF2
| Product | Product Code |
Order or Specifications |
99.9% Zinc Fluoride Sputtering Target |
ZN-F-03ST |
 |
99.99% Zinc Fluoride Sputtering Target |
ZN-F-04ST |
|
99.999% Zinc Fluoride Sputtering Target |
ZN-F-05ST
|
|
American Elements specializes in producing high purity Zinc fluoride sputtering targets with the highest possible density 
and smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Sputtering Targets for thin film are available monoblock or bonded with dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devises as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. Research sized targets are also produced as well as custom sizes and alloys. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Induction Plasma Spectrometry (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. We can also provide targets outside this range in addition to just about any size rectangular, annular, or oval target. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We also produce Zinc Fluoride as rods, powder and plates. Other shapes are available by request.
and smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Sputtering Targets for thin film are available monoblock or bonded with dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devises as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. Research sized targets are also produced as well as custom sizes and alloys. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Induction Plasma Spectrometry (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. We can also provide targets outside this range in addition to just about any size rectangular, annular, or oval target. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We also produce Zinc Fluoride as rods, powder and plates. Other shapes are available by request. Zinc is a Block D, Group 12, Period 4 element. The electronic configuration is [Ar] 3d10 4s2. In its elemental form zinc's CAS number is 7440-66-6. The zinc atom has a radius of 133.5.pm and it's Van der Waals radius is 139.pm. Zinc is a bluish-white, lustrous metal. It is brittle at ordinary temperatures but malleable at 100 to 150 o C. It is a fair conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. It has unusual electrical, thermal, optical, and solid-state properties that have not been fully investigated. The metal is employed to form numerous alloys with other metals. Brass, nickel, silver, commercial bronze, soft solder, and aluminum solder are some of the more important alloys.
| Formula | CAS No. | Appearance | Molecular Weight | Density | Melting Point | Boiling Point |
| ZnF2 | 7783-49-5 | White Powder | 103.27 | 4900 kg/m³ | 872 °C | 1500 °C |
| PRODUCT CATALOG | Submicron & Nanopowder | Tolling | Ultra High Purity | Sputtering Target | Crystal Growth | Rod, Plate, Powder, etc. |
©2001-2008. American Elements is a U.S. Registered Trademark. All rights reserved.
This website and all pages, designs, concepts, logos, and color schemes herein are
the copyrighted proprietary rights and intellectual property of American Elements.
This website and all pages, designs, concepts, logos, and color schemes herein are
the copyrighted proprietary rights and intellectual property of American Elements.
|
Recent Research & Development for Zinc
|
| American Elements Products can also be sourced at these sites: | |||||||
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
electronics-ee.com |  |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|