20th anniversary seal20th anniversary seal20th anniversary seal

Cadmium Antimonide Sputtering Target

CAS #:

Linear Formula:

CdSb

MDL Number:

N/A

EC No.:

234-596-0

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(5N) 99.999% Cadmium Antimonide Ingot
CD-SB-05-I
Pricing > SDS > Data Sheet >
(5N) 99.999% Cadmium Antimonide Lump
CD-SB-05-L
Pricing > SDS > Data Sheet >
(5N) 99.999% Cadmium Antimonide Powder
CD-SB-05-P
Pricing > SDS > Data Sheet >
(5N) 99.999% Cadmium Antimonide Sputtering Target
CD-SB-05-ST
Pricing > SDS > Data Sheet >
(5N) 99.999% Cadmium Antimonide Wafer
CD-SB-05-WF
Pricing > SDS > Data Sheet >

Cadmium Antimonide Sputtering Target Properties (Theoretical)

Compound Formula CdSb
Molecular Weight 234.17
Appearance Crystalline solid
Melting Point 456 °C
Boiling Point N/A
Density 6.92 g/cm3
Solubility in H2O N/A
Exact Mass 234.807174
Monoisotopic Mass 234.807174

Cadmium Antimonide Sputtering Target Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
Transport Information N/A

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 11/18/2019
Date Revised: 05/15/2015

SECTION 1. IDENTIFICATION

Product Name: Cadmium Antimonide Sputtering Target

Product Number: All applicable American Elements product codes, e.g. CD-SB-05-I 05 , CD-SB-05-L 05 , CD-SB-05-P 05 , CD-SB-05-ST 05 , CD-SB-05-WF 05

CAS #: 12014-29-8

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

CLASSIFICATION OF SUBSTANCE OR MIXTURE

Exclamation Mark - GHS07

Pictogram
Signal Word Warning
Hazard Statements
H302+H312+H332 Harmful if swallowed, in contact with skin, or if inhaled.
Precautionary Phrases
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor/physician if you feel unwell.
HMIS CLASSIFICATION:
Health: 2 Fire: 0 Reactivity Hazard: 1
NFPA RATING:
Health: 2 Flammability: 0 Reactivity Hazard: 1
EYE CONTACT: Causes irritation of the eyes.
SKIN CONTACT: Harmful in contact with skin.
INHALATION: Harmful if inhaled.
INGESTION: Harmful if swallowed.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Formula: CdSb
Molecular Weight: 234.16
CHEMICAL NAME CAS# %
Cadmium Antimonide 12050-27-0 100


SECTION 4. FIRST AID MEASURES

EYE EXPOSURE: Immediately flush the eyes with copious amounts of water for at least 15 minutes. Assure flushing under
eyelids. A victim may need assistance in keeping their eyelids open. Get immediate competent medical attention.
SKIN EXPOSURE: Wash affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
irritation persists.
INHALATION: Remove to fresh air and keep at rest. Closely monitor the victim for signs of respiratory problems, such as
difficulty in breathing, coughing, wheezing, or pain. In such cases, seek immediate medical assistance.
INGESTION: Seek medical attention immediately.


SECTION 5. FIREFIGHTING MEASURES

FLASH POINT: Product is not flammable.
Autoignition: Not available
EXPLOSION LIMITS: This product does not present an explosion hazard.
EXTINGUISHING MEDIUM: Use fire fighting measures that suit the surrounding fire.
SPECIAL FIRE FIGHTING PROCEDURES: Wear self-contained, approved breathing apparatus and full protective clothing,
including eye protection and boots.
HAZARDOUS COMBUSTION AND DECOMPOSITION PRODUCTS: Cadmium oxide and antimony oxide.


SECTION 6. ACCIDENTAL RELEASE MEASURES

PERSONAL PRECAUTIONS: Wear all appropriate equipment when using this material. Ensure adequate ventilation. Keep unprotected
persons away.
ENVIRONMENTAL PRECAUTIONS: Prevent spillage from entering drains or allowing to be released into the environment.
METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP: Pick up and arrange disposal without creating dust. Sweep
up and keep in suitable, closed containers for disposal.


SECTION 7. HANDLING AND STORAGE

PRECAUTIONS FOR SAFE HANDLING: Wear appropriate personal protective equipment. Use with adequate ventilation. Avoid
contact with skin and eyes. Avoid formation of dust.
CONDITIONS FOR SAFE STORAGE: Store in cool, dry, and well-ventilated area. Store away from oxidizing agents.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

EXPOSURE CONTROLS:
Component Exposure Limits Basis Entity
Cadmium Antimonide 0.5 mg/m3 TLV ACGIH
0.5 mg/m3 PEL OSHA
0.002 mg/m3 TLV ACGIH
0.002 mg/m3 PEL OSHA
PEL: Permissible Exposure Limit TLV: Threshold Limit Value over 8 hours of work.
EYE PROTECTION: Wear chemical safety glasses or goggles and face shield.
SKIN PROTECTION: Wear nitrile or rubber gloves, apron, or lab coat.
VENTILATION: Provide local exhaust, preferably mechanical.
RESPIRATOR: Use an approved respirator.
ADDITIONAL PROTECTION: Provide eyewash stations, quick-drench showers and washing facilities accessible to areas of use and
handling.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

COLOR AND FORM: Black solid
ODOR: None
MOLECULAR WEIGHT: 234.16
BOILING POINT: No data available
MELTING POINT: Not available
SPECIFIC GRAVITY: 6.92 gm/ml
VAPOR DENSITY: No data available
SOLUBILITY: Insoluble


SECTION 10. STABILITY AND REACTIVITY

STABILITY: Stable
HAZARDOUS POLYMERIZATION: Will not occur
CONDITIONS TO AVOID: None known
INCOMPATIBILITY: Strong oxidizing agents
DECOMPOSITION PRODUCTS: Cadmium oxide and antimony oxide


SECTION 11. TOXICOLOGICAL INFORMATION

ACUTE TOXICITY: Not available
CARCINOGENIC EFFECTS: Carcinogenic to humans.
MUTAGENIC EFFECTS: Not available
TETRATOGENIC EFFECTS: Not available
RTECS: Not available
Antimony compounds may cause metallic taste, gastrointestinal disturbances, vomiting, diarrhea, dizziness, and systemic poisoning.
Chronic exposure may cause liver and kidney damage. Dermatitis and eczematous skin eruptions may result from skin contact.
Cadmium compounds are highly toxic and experimental carcinogens. Exposure affects the respiratory tract, kidneys, and liver.
Ingestion may cause nausea, salivation, vomiting, and diarrhea. Ingestion or inhalation of cadmium compounds may be fatal.
To the best of our knowledge the toxicological effects of this compound have not been fully investigated.


SECTION 12. ECOLOGICAL INFORMATION

Very toxic for aquatic organisms. May cause long lasting harmful effects to aquatic life. Also poisonous for fish and plankton in water
bodies. Danger to drinking water if even extremely small quantities leak into the ground.


SECTION 13. DISPOSAL CONSIDERATIONS

Dispose of in according to local, state, and federal regulations.


SECTION 14. TRANSPORT INFORMATION

UN2570 UN2570
Cadmium compounds, n.o.s. Cadmium compound, n.o.s.
(cadmium antimonide) (cadmium antimonide)
Class 6.1 Class 6.1
PG III PG III
Marine Pollutant: No


SECTION 15. REGULATORY INFORMATION

SARA (TITLE 313): Cadmium antimonide
CALIFORNIA PROP. 65: Cadmium antimonide


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2018 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Cadmium Antimonide Sputtering Target

High Purity (99.99%) Metallic Sputtering TargetAmerican Elements specializes in producing high purity Cadmium Antimonide Sputtering Targets with the highest possible density and smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Sputtering Targets for thin film are available monoblock or bonded with planar target dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devices as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. We offer all shapes and configurations of targets compatible with all standard guns including circular, rectangular, annular, oval, "dog-bone," rotatable (rotary), multi-tiled and others in standard, custom, and research sized dimensions. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes. Other shapes are available by request.

Cadmium Antimonide Sputtering Target Synonyms

N/A

Chemical Identifiers

Linear Formula CdSb
MDL Number N/A
EC No. 234-596-0
Beilstein Registry No. N/A
Pubchem CID 44464748
IUPAC Name antimony; cadmium
SMILES [Cd].[Sb]
InchI Identifier InChI=1S/Cd.Sb
InchI Key WWGNOEDOFJKLST-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Payment Methods

American Elements accepts checks, wire transfers, ACH, most major credit and debit cards (Visa, MasterCard, AMEX, Discover) and Paypal.

For the convenience of our international customers, American Elements offers the following additional payment methods:

SOFORT bank tranfer payment for Austria, Belgium, Germany and SwitzerlandJCB cards for Japan and WorldwideBoleto Bancario for BraziliDeal payments for the Netherlands, Germany, Austria, Belgium, Italy, Poland, Spain, Switzerland, and the United KingdomGiroPay for GermanyDankort cards for DenmarkElo cards for BrazileNETS for SingaporeCartaSi for ItalyCarte-Bleue cards for FranceChina UnionPayHipercard cards for BrazilTROY cards for TurkeyBC cards for South KoreaRuPay for India

Related Elements

See more Cadmium products. Cadmium (atomic symbol: Cd, atomic number: 48) is a Block D, Group 12, Period 5 element with an atomic weight of 112.411. Cadmium Bohr ModelThe number of electrons in each of Cadmium's shells is 2, 8, 18, 18, 2 and its electron configuration is [Kr] 4d10 5s2. The cadmium atom has a radius of 151 pm and a Van der Waals radius of 230 pm.Cadmium was discovered and first isolated by Karl Samuel Leberecht Hermann and Friedrich Stromeyer in 1817. In its elemental form, cadmium has a silvery bluish gray metallic appearance. Cadmium makes up about 0.1 ppm of the earth's crust. Elemental CadmiumNo significant deposits of cadmium containing ores are known, however, it is sometimes found in its metallic form. It is a common impurity in zinc ores and is isolated during the production of zinc. Cadmium is a key component in battery production and particular pigments and coatings due to its distinct yellow color. Cadmium oxide is used in phosphors for television picture tubes. The name Cadmium originates from the Latin word 'cadmia' and the Greek word 'kadmeia'.

See more Antimony products. Antimony (atomic symbol: Sb, atomic number: 51) is a Block P, Group 15, Period 5 element with an atomic radius of 121.760. Antimony Bohr Model The number of electrons in each of antimony's shells is 2, 8, 18, 18, 5 and its electron configuration is [Kr] 4d10 5s2 5p3. The antimony atom has a radius of 140 pm and a Van der Waals radius of 206 pm. Antimony was discovered around 3000 BC and first isolated by Vannoccio Biringuccio in 1540 AD. In its elemental form, antimony has a silvery lustrous gray appearance. Elemental Antimony The most common source of antimony is the sulfide mineral known as stibnite (Sb2S3), although it sometimes occurs natively as well. Antimony has numerous applications, most commonly in flame-retardant materials it also increases the hardness and strength of lead when combined in an alloy and is frequently employed as a dopant in semiconductor materials. Its name is derived from the Greek words anti and monos, meaning a metal not found by itself.

TODAY'S SCIENCE POST!

November 18, 2019
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day

Magnesium takes ShAPE