Functional Elements Coatings on Ti-6Al-4V Alloy by Plasma Electrolytic Oxidation for Biomaterials.

Author(s) Park, M.G.; Choe, H.C.
Journal J Nanosci Nanotechnol
Date Published 2019 Feb 01
Abstract

In this study, functional elements coatings on Ti-6Al-4V alloy by plasma electrolytic oxidation for biomaterials were studied using various experimental techniques. For this study, Ti-6Al-4V ELI disk (grade 5, Timet Co. Ltd., Japan diameter; 10 mm) were used as the substrate for PEO treatment in the electrolyte containing Ca, P, Si, Zn, and Mn ions. The PEO treatment was performed using a pulsed DC power supply at 280 V for 3 min. The PEO-treated surface was observed with field-emission scanning electron microscope (FE-SEM), and energy dispersive X-ray spectrometry (EDS; Oxford ISIS 310, England), Image Analyzer software, and X-ray diffractometer (TF-XRD, X'pert Philips, Netherlands). The number of pores increases, as the Zn ion content increases. And the number of pores decrease, as the Mn ion content increases. The addition of Zn and Mn ions affects the number and size of pores and the area occupied by the pores. Mn and Zn are distributed around pores and in the pores. Anatase and rutile peaks appear and the HA peak shifted to the left in the case of Mn and Zn ion additions.

DOI 10.1166/jnn.2019.15903
ISSN 1533-4880
Citation Park M-, Choe H-. Functional Elements Coatings on Ti-6Al-4V Alloy by Plasma Electrolytic Oxidation for Biomaterials. J Nanosci Nanotechnol. 2019;19(2):1114-1117.

Related Applications, Forms & Industries