20th anniversary seal20th anniversary seal20th anniversary seal

Silver/Palladium Conductor Paste

Linear Formula:

Ag/Pd

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
Silver Palladium Paste
AG-PD-01-PST
Pricing > SDS > Data Sheet >
Question? Ask an American Elements EngineerWHOLESALE/SKU 0000-742-256001

Silver/Palladium Conductor Paste Properties (Theoretical)

Compound Formula Ag/Pd
Appearance Gray to black thixotropic paste
Melting Point N/A
Boiling Point N/A
Density N/A

Silver/Palladium Conductor Paste Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
Transport Information NONH for all modes of transport

View and Print SDS

SAFETY DATA SHEET

Date Created: 5/15/2015
Date Revised: 5/15/2015

SECTION 1. IDENTIFICATION

Product Name: Silver/Palladium Conductor Paste

Product Number: All applicable American Elements product codes, e.g. AG-PD-01-PST

Relevant identified uses of the substance: Scientific research and development


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture in accordance with 29 CFR 1910 (OSHA HCS)
The substance is not classified as hazardous according to 29 CFR 1910 (OSHA GHS).
Hazards not otherwise classified
No information known.
Label elements
GHS label elements
Not applicable
Hazard pictograms
Not applicable
Signal word
Not applicable
Hazard statements
Not applicable
WHMIS classification
Not controlled
Classification system
HMIS ratings (scale 0-4)
(Hazardous Materials Identification System)
Health (acute effects) = 1
Flammability = 1
Physical Hazard = 1
Other hazards
Results of PBT and vPvB assessment
PBT:
Not applicable.
vPvB:
Not applicable.
Product contains <12w% material with unknown Acute Tox. Data


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Silver
7440-22-4
40-60%
Palladium
7440-05-3
4-10%
2, 2, 4-Trimethyl-1, 3-Pentanediol Monoisobutyrate
25265-77-4
20-40%


SECTION 4. FIRST AID MEASURES

Description of First Aid Measures
First-Aid Measures General: Never give anything by mouth to an unconscious person. If exposed and concerned: Get medical advice/attention.
First-aid Measures after Inhalation: When symptoms occur: go into open air and ventilate suspected area. Remove to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms: Get medical advice/attention.
First-aid Measures after Skin Contact: Remove contaminated clothing. Drench affected area with water for at least 15 minutes.
Wash contaminated clothing before reuse. Wash with plenty of soap and water. If skin irritation or rash occurs: Seek medical advice.
First-aid measures after Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing. Obtain medical attention if irritation develops or persists.
First-aid Measures after Ingestion: Rinse mouth. Do not induce vomiting. Get immediate medical advice/attention.
Most Important Symptoms and Effects, both Acute and Delayed
Symptoms / Injuries : Possible Sensitizer.
Symptoms / Injuries after Inhalation : May Cause Irritation, Occupational Asthma.
Symptoms / Injuries after Skin Contact : May Cause Irritation, Dermatitis.
Symptoms / Injuries after Eye Contact : May Cause Irritation.
Symptoms / Injuries after Ingestion : May Cause Irritation, Nausea, Vomiting, Diarrhea.
Chronic Symptoms :
May Cause Discoloration Of The Skin And Mucous Membranes, Sensitization, Dermatitis .
Indication of any Immediate Medical Attention and Special Treatment Needed
If you feel unwell, seek medical advice (show the label where possible)


SECTION 5. FIREFIGHTING MEASURES

Extinguishing Media
Suitable Extinguishing Media : Water, Foam, Carbon Dioxide, Dry Chemical
Unsuitable Extinguishing Media : Do not use a heavy water stream. Use of a heavy stream of water may spread fire.
Special Hazards Arising from the Substance or Mixture
Fire Hazard : Product is Flammable
Explosion Hazard : Product is not Explosive
Reactivity : Hazardous Reactions are unlikely to occur under normal circumstances
Advice for Fire Fighters
Precautionary Measures Fire: Excercise caution when fighting any chemical fire.
Firefighting Instructions: Use water spray or fog for cooling exposed containers. In case of major fire and large quantities: Evacuate area.
Protection During Firefighting: Do not enter fire area without proper protective equipment, including respiratory protection.
Other Information: Do not allow run-off from fire fighting to enter drains or water sources. Do not allow the product to be released into the environment.


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, Protective Equipment and Emergency Procedures
For Non-emergency Personnel
Protective Equipment : Use appropriate personal protective equipment (PPE).
Emergency Procedures : Evacuate unnecessary personnel
For Emergency Responders
Protective Equipment : Equip cleanup crew with proper protection.
Emergency Procedures : Upon arrival at the scene, a first responder is expected to recognize the presence of dangerous goods, protect oneself and the public, secure the area and call for the assistance of trained personnel as soon as conditions permit.
Environmental Precautions
Prevent entry to sewers and public waters
Methods and Material for Containment and Cleaning up
For Containment : Absorb and/or contain spill with inert material, then place in suitable container. As an immediate precautionary measure, isolate spill or leak in all directions.
Methods for Cleaning up : Clear up spills immediately and dispose of waste safely. Carefully shovel or sweep up spilled material and place in a suitable container. Avoid generation of dust during clean-up of spills. Contact competent authorities after a spill.
Reference to Other Sections
See section 8, Exposure controls and Personal Protection. See Section 13, Disposal considerations.


SECTION 7. HANDLING AND STORAGE

Precautions for Safe Handling
Precautions for safe handling : Use only outdoors or in a well ventilated area. Do not handle until all safety precautions have been read and understood.
Do not breath dust or fumes. Avoid contact with eyes, skin and clothing.
Hygiene Measures : Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and again when leaving work. Contaminated work clothing should not be allowed out of the workplace.
Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product.
Conditions for Safe Storage, Including and Incompatibilities
Technical measures : Comply with applicable regulations.
Storage Conditions : Store in a dry, cool and well-ventilated place. Keep container closed when not in use. Store locked up.
Sulfur, Halogens, Arsenic, Bases, Sodium Tetrahydroborate, Strong Acids, Strong Oxidizers
Specific End Use(s)
For Professional use Only.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Exposure Controls
Appropriate Engineering Controls: Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.
Local exhaust and general ventilation must be adequate to meet exposure standards. Site-specific risk assessments should be conducted to determine the appropriate control measures. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits.
Personal Protective Equipment: Protective clothing. Gloves. Insufficient ventilation: wear respiratory protection. Protective goggles.
Materials for Protective Clothing: Chemically resistant materials and fabrics.
Hand Protection: Wear chemically resistant protective gloves.
Eye Protection: Chemical goggles or safety glasses.
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: If exposure limits are exceeded or irritation is experienced, approved respiratory protection should be worn.
Environmental Exposure Controls: Do not allow the product to be released into the environment
Other Information: When using, do not eat, drink or smoke.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties
General Information
Appearance:
Form: Black paste
Odor: Not determined
Odor threshold: Not determined.
pH-value: Not determined.
Change in condition
Melting point/Melting range: Not determined.
Boiling point/Boiling range: Not determined.
Sublimation temperature / start: Not determined
Flash point: Not determined.
Flammability (solid, gaseous)
Not determined.
Ignition temperature: Not determined
Decomposition temperature: Not determined
Auto igniting: Not determined.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined
Upper: Not determined
Vapor pressure: Not determined
Relative density
Not determined.
Vapor density
Not determined.
Evaporation rate
Not determined.
Solubility in / Miscibility with Water: Not determined
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
dynamic: Not determined.
kinematic: Not determined.


SECTION 10. STABILITY AND REACTIVITY

Reactivity
No information known.
Chemical stability
Stable under recommended storage conditions.
Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to specifications.
Possibility of hazardous reactions
Reacts with strong oxidizing agents
Conditions to avoid
No further relevant information available.
Incompatible materials:
Oxidizing agents
Hazardous decomposition products:
Carbon Oxides, acrylic monomers, Irritating and toxic fumes and gases, metal oxides, metal fumes.


SECTION 11. TOXICOLOGICAL INFORMATION

Information on toxicological effects
Acute toxicity:
The Registry of Toxic Effects of Chemical Substances (RTECS) contains acute toxicity data for this substance.
LD/LC50 values that are relevant for classification:
Oral LD50 3200 mg/kg (rat)
Skin irritation or corrosion:
May cause irritation
Eye irritation or corrosion:
May cause irritation
Sensitization:
No sensitizing effects known.
Germ cell mutagenicity:
No effects known.
Carcinogenicity:
No classification data on carcinogenic properties of this material is available from the EPA, IARC, NTP, OSHA or ACGIH.
Reproductive toxicity:
No effects known.
Specific target organ system toxicity - repeated exposure:
No effects known.
Specific target organ system toxicity - single exposure:
No effects known.
Aspiration hazard:
No effects known.
Subacute to chronic toxicity:
No effects known.
Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.


SECTION 12. ECOLOGICAL INFORMATION

Ecotoxicity: No further relevant information available.
Persistance and Degradability: No further relevant information available.
Bioaccumulative Potential: No further relevant information available.
Mobility in Soil: No further relevant information available.


SECTION 13. DISPOSAL CONSIDERATIONS

Waste treatment methods
Recommendation
Consult state, local or national regulations to ensure proper disposal.
Uncleaned packagings:
Recommendation:
Disposal must be made according to official regulations.


SECTION 14. TRANSPORT INFORMATION

Not hazardous for transportation
UN-Number
DOT, ADN, IMDG, IATA
Not applicable
UN proper shipping name
DOT, ADR, ADN, IMDG, IATA
Not applicable
Transport hazard class(es)
DOT, ADR, ADN, IMDG, IATA
Class
Not applicable
Packing group
DOT, ADR, IMDG, IATA
Not applicable
Environmental hazards:
Not applicable.
Special precautions for user
Not applicable.
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Not applicable.
Transport/Additional information:
DOT
Marine Pollutant (DOT):
No
UN "Model Regulation":
Not applicable


SECTION 15. REGULATORY INFORMATION

Safety, health and environmental regulations/legislation specific for the substance or mixture
GHS label elements
Not applicable
Hazard pictograms
Not applicable
Signal word
Not applicable
Hazard statements
Not applicable
National regulations
All components of this product are listed in the U.S. Environmental Protection Agency Toxic Substances Control Act Chemical substance Inventory.
All components of this product are listed on the Canadian Domestic Substances List (DSL).
SARA Section 313 (specific toxic chemical listings)
Substance is not listed.
California Proposition 65
Prop 65 - Chemicals known to cause cancer
Substance is not listed.
Prop 65 - Developmental toxicity
Substance is not listed.
Prop 65 - Developmental toxicity, female
Substance is not listed.
Prop 65 - Developmental toxicity, male
Substance is not listed.
Information about limitation of use:
For use only by technically qualified individuals.
Other regulations, limitations and prohibitive regulations
Substance of Very High Concern (SVHC) according to the REACH Regulations (EC) No. 1907/2006.
Substance is not listed.
The conditions of restrictions according to Article 67 and Annex XVII of the Regulation (EC) No 1907/2006 (REACH) for the manufacturing, placing on the market and use must be observed.
Substance is not listed.
Annex XIV of the REACH Regulations (requiring Authorisation for use)
Substance is not listed.
Chemical safety assessment:
A Chemical Safety Assessment has not been carried out.


16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2016 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Silver/Palladium Conductor Paste

Silver/Palladium Conductor Paste is a solderable, screen printable paste available in various compositions (Ag:Pd 20:1, 6:1, 3:1, 2:1, and others). Please request a quote above to receive pricing information based on your specifications.

Silver/Palladium Conductor Paste Synonyms

Silver-Palladium conductive paste

Chemical Identifiers

Linear Formula Ag/Pd
MDL Number N/A
EC No. N/A

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Palladium Bohr ModelSee more Palladium products. Palladium (atomic symbol: Pd, atomic number: 46) is a Block D, Group 10, Period 5 element with an atomic weight of 106.42. The number of electrons in each of palladium's shells is 2, 8, 18, 18 and its electron configuration is [Kr] 4d10. The palladium atom has a radius of 137 pm and a Van der Waals radius of 202 pm. In its elemental form, palladium has a silvery white appearance. Palladium is a member of the platinum group of metals (along with platinum, rhodium, ruthenium, iridium and osmium). Elemental PalladiumPalladium has the lowest melting point and is the least dense of the group. Palladium can be found as a free metal and alloyed with other platinum-group metals. Nickel-copper deposits are the main commercial source of palladium. Palladium was discovered and first isolated by William Hyde Wollaston in 1803. Its name is derived from the asteroid Pallas.

See more Silver products. Silver (atomic symbol: Ag, atomic number: 47) is a Block D, Group 11, Period 5 element with an atomic weight of 107.8682. Silver Bohr ModelThe number of electrons in each of Silver's shells is 2, 8, 18, 18, 1 and its electron configuration is [Kr]4d10 5s1. The silver atom has a radius of 144 pm and a Van der Waals radius of 203 pm. Silver was first discovered by Early Man prior to 5000 BC. In its elemental form, silver has a brilliant white metallic luster. Elemental SilverIt is a little harder than gold and is very ductile and malleable, being exceeded only by gold and perhaps palladium. Pure silver has the highest electrical and thermal conductivity of all metals and possesses the lowest contact resistance. It is stable in pure air and water, but tarnishes when exposed to ozone, hydrogen sulfide, or air containing sulfur. It is found in copper, copper-nickel, lead, and lead-zinc ores, among others. Silver was named after the Anglo-Saxon word "seolfor" or "siolfur," meaning 'silver'.

TODAY'S SCIENCE POST!

May 25, 2018
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day

Pint cracks code to cheap, small carbon nanotubes